Bean

ahh poo. after those dates my next weekend off isnt until the 8th of december!

wheres the cheapest place to get the AEM wideband with sensor?

Well my easy outs came today, got the snapped bolt out no bother at all piece off piss, i couldnt belive it! so i got my bmcs fitted. and changed a few bits of vacuume piping for nice new blue ones and got my oil catch can fitted, i found the perfect location, i think it was an old aircon bracket or something, fitted perfectly and the hole was alread there tapped and the right size! Top stuff, thanks for the help guys.

WEPR mani?

what about saturday the 10th of nov??

Thanks for the reply, could you go into a bit more detail please mate. i thought it might be to do with my hks fcd so i found that under the dash and made sure the wires were all ok.

Well my code 25 has gone but i still have the code 31 has anyone got any ideas? im going to have to take it to a garage unless anyone can help.

there is no thread sticking out of the whole on my snapped bolt. i have some of that chemical metal stuff. the bolt that has snapped is the small 10mm one that has the spring on for the throttle cable.

Plently of places in carlisle to go,theres all the car parks on the industrial estate where macdonalds and all the other shops are. plenty of room for a few wee starlets ;) anymore people from this region that could make it? As for a date how does sunday Nov 4th sound?? if anyone isnt sure of where to go i can give you my mobile number and convoy you in lol

cool i will have a look for them.

i was just tightening up the bolts on my cusco bmc, and i tightened up the 10mm bolt that goes intop the strut tower to much and it snapped so the thread is stuck in the hole. Any ideas how to get it out??

well my gt hasnt been running right recently. seems to have been miss firing and holding back now and again and i also had a vacuume leak where a t piece broke. i replaced the t piece and i had slightly more vacuume back than i lost, so that was fixed and the missfiring i think my have been due to a loose wire on my safc2?? So i did the diagnostic check and i have a code: 25 lean signal 31 AFS (where fitted) open circuit in VC, VS, VB or short circuit in VC or Map (where fitted) open circuit in map or short circuit in VC?? if im right afs is air flow sensor is it not? could the code 31 be due to my broken vacuume t piece that i have now fixed?? Please help me guys,

thats some top photoshop skills there!! wishi was that good. more practise i think

is there anyone else who could make it to this meet?

That sounds good. i dont want to run any more boost than what my car is running now (14psi) so if i brought the greddy ultimate with the complete harness kit would you fit it for me before mapping the car? Also how long does the £250 dyno tune allow for?

Cool it will be atleast a few weeks until i have the emanage as insurance is due next week and im buying an wideband lc1 and xd guage as my air fuel guage is poo. how much am i looking at for the full emanage setup. also y Do i need the 3 bar map sensor? what differnece does that make? Baby bhp dont think im doubting your skills but did u say further up that you havent tuned many starlets before?? Do you think i will notice much difference in the car if i get the emanage setup compared to just using the safc that i am using now?

Cumbria, near workington cockermouth

both would be good

I think im going to go for a greddy ultimate and get it mapped in the near future, but i dont have a clue where i would take my gt? im from cumbria so theres no where around me that i know of. at the moment im using an apexi safc running 210bhp or just over at 14psi. So i need the greddy ultimate unit then i need to buy the ignicton and injector harnesses separetly right? or is there other things that i would need?

Depending on when this meet is i would be up for it. get your names down guys/ladys!!

Cool, we need more than the two of us tho lol wouldnt be much of a meet.

Just thought i would post up to let you guys no ive got a ep82 gt now. Im from around the workington area. I would like to get to some of the meets to see some more starlets.

Thanks mate, you dont no if theres any pics of them any where do you. im hoping to just modify the standard subframe unless some come up cheap.

hi guys im pretty new here and ive nearly had my gt for 2 weeks. im after a set of evo 8 recaros, i just wondered if anyone had fitted them before and if there were any pics so i could see what they look like fitted. i think they will go well with the rest of my gt's interior.

i have the g6 box in mine its great. if im correct you need the box from the 1.3 not the 1.6 corola.