johnegan
-
Posts
31 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Events
Everything posted by johnegan
-
the thing is if you do fork out the extra few quid for the coilovers ul a) sell them far easier if you decide to break the car B ) better in every shape and form performance wise c) springs will be shocking if you decide to serious mod the car d) coilovers will be easier to fit rather than getting springs fitted to shocks etc.
-
ha no i doubt it very much on that spec.although i have tapped 225kph before having to slow down with about another 2k left in 5th gear.converts to 142mph but i had 260bhp td04
-
savage.is it timed via crank sensors?are they hard wire in?i loved the idea of installing coil packs but never got around to it.ha id say i had more than 220atw in my car when it was built.no probs with the dizzy cap thank god.dyno sheet makes the turbo look very laggy.id say your greatful for them nitrous bottles:)
-
one word 5e! its not a problem on 5e and his posted and polished head and intake plenum helps alot. this car is gorgeous.is setting up the coil pack hard?is it worth the gains?over here we all still use the distributor:(
-
FACT or you could try totting up your posts on toyotagtturbo.com ha ;) ;)
-
Glanza¥¥¥
johnegan replied to ep91_glanza's topic in EP91 Glanza Progress Blogs
jeez you like your camera:) -
i have one.i have a grex oil filter relocation kit and now an oil cooler and thermostat.i dont understand how you mean they kink?im running my pipe off the td04l so that could be the differnce.are you on ct9?i cant see how they would kink.what relocation kit you have?
-
www.hidirl.com
-
picture perhaps?
-
yes as it would raise CR.if you got your hands on a cruise 1.4 one you wont need a map.perhaps get it express delivered from rhdjapan.com?...or even shop around the manufacturing companys in england for a 1.4 gasket?
-
get the trust greddy one off rhd japan.108euro delivered.looks well aswel
-
i want some too.let me see the final picture of them.id love this one...
-
no plain and simple
-
maybe the engine needs to be retimed to deal with your new and working thermostat.it could have been adjusted and timed according to the old thermostat causing the engine to be cold and idle high.mine had to be readjusted after the new thermostat went in and head gasket done 2 days after the work was done.nothing major
-
mines 1331cc
-
gut out your cat our of d pipe nad uv got a free decat pipe.butchery but it works:)
-
ha funny shit. no i couldn get a spanner wrapped around the bolt and wz afraid of roundin it.cuda been trouble then since this is my thread ye no anyone lookin for Forged pauter rods and forged wiseco 74mm pistons. brand new in boxs.goin fairly cheap considerin wat der on sale from n d net. pm if interested
-
ha believe it or not there is actually a special tool for it.its like the top of a ratchet and the steel is really thin with a bit missin up the side of it to allow the wire space.brought it to a garage top get removed.two second job:)
-
installing decat today.havin trouble gettin lambda sensor out of old cat and into new onw.wats d story?its a siza 22mm spanner but cant get it wrapped around it.is there any special tool or anything for removing it?
-
do ye think this rad will do the job on d glanza with no problems or should i hold out and buy a dual core.its from sir civic.even though theres alot of work done to my yoke est bhp 180">
-
The Cynos B Turbo...or Asshat as I like to call it
johnegan replied to riko666's topic in Paseo Progress Blogs
nice lookin but wher do you buy all your jam racing stuff?im only mad for it. -
dunno wat rear splitter it is.japs=nutters:)
-
swap them for my vracing lightweight wheels?see them on "my glanza" on latest poted topic page
-
just uploaded pics of my car
-
thanks a million.your a saint