Jozinobi

Hi Sam Please make sure they are expecting the small jiffybag I sent at Colchester Toyota ) Cheers Joz

Hi Sam Turns out all the parts you sent are right ;) I am still missing a few others and have sent them to Colchester Toyota by 1st Class Recorded (I would like them back please) I have sent the sliding pin I need (x4) I have also sent a draining bolt I need with its washer (x2), its not visible in the diagram but is where the red arrow is pointing to. Im know also in need a brake bleed valve (x2) and the cap for it (x2), these I did not send. Here is a revised diagram of what I need now. Cheers Joz

Dave's Parts Site Gets the thumbs up from me. Joz

Happy Birthday bro!!! Enjoy your day! Joz

Hi Sam I will send them back over to Colchester Toyota tomorrow along with a few parts of mine so u can see what is needed. Its no hassle and I will be glad to get the right parts as I need the new brakes on soon. Cheers Joz

Hi mate Welcome to the site. Check out the section you just posted in -Turbo-Tech- and you will find a few articles that have already covered Hybrid Turbos. They are well worth checking out. Enjoy UKSC sensibly Joz

Hi Sam Everything is paid for. I received the brake parts today but there is a lot of bolts missing and some of the parts are not right. I only received 4 bolts and they dont seem to be the right ones anyway. These bolts I need are sliding pin/bolts that hold the boot and small washer (meant to be metal not rubber) together as one piece for the caliper. The rubber boots and small washers are not right either What Im going to do is send these back. I will also include one of the bolts I need with the proper boot and small washer needed as an example (I will be needing it back). Im not 100% the brake clips kit is right either but I will check my brake pads against them to make sure. I only needed one but decided to replace all 4. The other bolts I need are vital to hold the caliper to the brake carrier. There was a chance this would happen, even after all the checking etc. I hope we can work something out Talk soon Joz

Idrees would be your best bet for this info as he has worked with them. Im sure he will read this. Joz

Its cool mate. I would still like to pay for everything together, ignore my previous message. I just need to know that everything I need will be in the two kits you mentioned. Is there a pic of the kits from your epc just to make sure? You confused me a bit when you mentioned "everything with a red dot expect 8 bolts and 4 bushes that are shown with the caliper comes within those two kits" so forgive me for asking. Don't worry I will pay, but that valve needs to get there in advance. The brake parts will need to be sent to me, not Simon :angry: Cheers for your time and help. Joz

Sound Sam. I'll pm you my mates address. Will need your paypal address also. Please make sure its the right part number u ordered :angry: - 13715 ***** Many Thanks Joz

Glad your all sorted on the exam front Tommy mate. Enjoy your summer to the max!!! Joz

Cheers man. I think he will scout my reply sooner or later. If not I will call him :angry:. Joz

Nice project you have going on. You can't beat the Glanza parts for totally transforming your cars look. Keep up the good work. Am liking the colour, would be nice to see some shots of it in different light. Looking forward to future progress. Joz

Here is the model code for the Brakes Sam - GF-AE111-ACFVF - Its the Levin BZR. Cheers Joz

Indeed. Heat Range 6 for Standard EP N/A Heat Range 7 for Standard GT/Glanza/Highly Modified N/A Heat Range 8 recommended for more modified motors. Joz

NGK Iridium mate. You can't go wrong. Make sure to use minimum heat range 7 (as standard) for your Glanza mate. Dave Burwash does a good price on them. Joz

Here is the item I need Sam. http://i79.photobucket.com/albums/j148/Sta.../zorstvalve.jpg Beside the red dot, I just need one of these. Its from a Toyota Paseo 1.5 5EFE Engine (any year is fine 96 onwards) The full number you can only get off the EPC. Please let me know if you can get this ordered today. Cheers Joz

Christ Phil. All the best to you and your family is all I can say dude. This is a really hard time for you guys and its just not on. From what has gone on the last few months you have taken things too well dude.. Hope it doesnt screw with your future plans too much. A lot of people don't realise how harsh the situation is. Your EP is safe and sound tho bud. Give us a shout anytime. Peace Always. Joz

Here is an EP82 halfcut for example JAG http://www.mpdesign.id.au/images/halfcut1.jpg You get the whole engine, loom, drive shafts, ancillaries, front suspension etc etc. Much more parts you will need for the pending conversion. Joz

Sorry to hear you are having issues with the forum JAG and anyone else. The problem does sound very 'browser' based rather than the invision powerboard itself as 'cookies' and stored history/private data hold all your login info and passwords etc and are mainly set by the browser itself. I use Firefox myself and havent had any problems mate. Try what stylophonic suggested and see how you get on. What happens with the strip on the right you mention sounds crazy tho. If there is anything else that seems out of the ordinary please let us know. We will do our best to help buts its not easy when we havent experienced the problems ourselves to find a fix Altho Im sure its just a small setting tweak somewhere. Cheers Joz

I would really appreciate ordering that one 5EFE exhaust valve first please Sam. Its really time sensitive. How long would the part take to get to you? I need it sent to Kent. Cheers Joz

Thats much appreciated Sam The model number will defo be a car equipped with 4AGE/4AGZE, nothing else. Please may I request the exhaust valve first as I need it ordered straight away and can pay by paypal today. I need it sent to someone else in UK. Cheers Joz

Indeed the brakes are for my EP91 for a conversion. I know it wont help that much but here is a pic of my exact brakes that I personally own. they seem pretty old. Here is a revised diagram of what I need Sam, I was going to buy the whole lot, but that in red is all I need (x4 where noted) I also need one exhaust valve for a 5efe. Thanks Joz

Right the best I can find so far are these numbers. Levin Model Numbers Unfortunately there is no 'five' digits afterwards. The brakes I have are off a AE101 so 1991-1994 but Im sure they are all shared by all models that use the twin pot brakes. Those Levins would be either the supercharged ZE versions or Superstrut versions. Joz

Hi Sam Im having a hard time sourcing the available model codes. Could you list the options you have so I can see? Does the old EPC I sent you not help at all? Im also after one exhaust valve, its for a 5efe. I would like to get this sorted asap Cheers Joz