-
Content Count
2028 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by 5T4R7ET N/A
-
-
You will need the remove the flywheel as well, its sits behind it
The rubber seal is just a big flat ring.
Looks like this
-
On a cold start you will hit the 10's then it will slowly lean out to 14.3-9 when fully warm.
The car would stink of petrol if the afr was 10 when warm.
Does the afr not change when your driving? If not you might reqiure a new AEM o2 sensor (bosch)
I think there is a way of testing the aem sensor. Expose to air and it will go 20 or blanks, put in a petrol soaked cloth and it should go to 10.
-
Just a small update,
Decided to tiger seal the the engine mounts. Dont want vibrations just a little support should be enough
If anyone who wants to do this, you can only do half the mounts then do the other side
-
Got mine today,
thank you very much.
-
If you want fluoro lined then its not cheap,
Viperperformance.co.uk
-
200 on a stock na, thats unreal.
Moving onto another level in 4efe tuning now
Good work mate
-
^^ thats a bloody good deal, can only buy spring for that money, bargain
-
^^ getting something else??
-
It would be pretty hard to figure out without a paint code, is it not in any reciepts or stickers anywhere?
I can see the original colour is black but this blue has a nice tone.
-
Nice colour dude,
Not many in this colour
-
At a guess it could be temperature related? Its the cheap and easy option so try it first and see how it goes
-
^^ they wonder why people take the law into there own hands
Had a drunk driver go up my road smashing cars, completely totalled my neighbours car.
He drove off at 10mph because of the damage, police came fast because he had been hitting other cars earlier. To my suprise they didnt even bother trying to stop him. If someone was walking down my road he would of killed them.
Completely lost faith in the police as other people tell me the same storey. They only react when someone been killed or potentially going to die. Its too late by then. Rant over!
Skyline is looking good.
-
Try changing your clutch fluid, as these car get old the fluid starts to degrade.
If that does not work get back to us.
-
^^ i was thinking same, because he's running rich aswel. Lol
-
That didnt take long!
Good to see you got clean starlet,
i call the colour burple, looks nice.
-
Then it most likely is adjustable, you will probably have to experiment when the length until you have the boost you want
The longer the actuator arm the less boost,
you will probably need to lengthen your to get it 0.5
-
Are the standard td04 actuators adjustable?
When i got my td04l it didnt look adjustable so i got a HKS actuator in good nick. These are very easy to adjust
-
So the power loss is constant now and all the time?
And it only feels weak whilst boosting?
-
I ran 0.5 bar on a standard fuel setup, no adjustable fuel pressure regulator.
I had wideband and it fuelled 11.5 on boost.
Make sure you have a good working actuator.
-
I wanted to do this as it will probably stop front wheel rubbing during hard cornering.
Need 20mm spacers to clear brakes
If you fully open you door there should be one or two near the door hinges? Cant be that different from ep91
-
There is pressure that has to go somewhere and through the breather is the best option.
So yes it should have a breather
-
Try halfords cutting compound on it, then polish and wax.
Its a yellow tube for £4/5
-
Dont forget it needs to be fluoro lined for oil return
-
Nice updates, crystal headlights really freshen up the front end.
Car looks pretty clean underneath, just a little surface rust, minor corrosion.
Fucking really
in Lifestyle General
Posted
Ouch!
Good thing is its a easy fix, just remove old and put new ones on.
I assume the bumper and bonnet are ok?
Might be able to find same colour if your lucky