Derek

Seen a skyline with those reflective ones before, you really have to be at the right angle to see it.

ROCKER COVER Today I replaced a painted rocker, which i painted ages ago was waiting for the PVC valve... So, get everything out of the way for the rocker to come loss. After you take those nut off the rocker, u left with this washers, pick them off, them the rocker should come off easily. Use flat head screw driver on all corners, till you see the rocker moving slowly. once its off you will see this Those are the parts may need to be replace, grommet is 90480-18006, PVC vlave as pic, and gasket as pic. not sure what part numbers are for the washers. Put everything back in, done

Shit, sure when i sent you the rob was Bling Bling. Nice little touch ups on the bay.

Dude it will fit to quads, just cut a tiny bit of the bulb fins. the one on the left been modded.

Haha, ok now i know who you are here. Yea nice to meet you, but we didn't chat for long as we got chuck out the car park, haha!!!

I saw that too, hehe!!!

Had one of those put in on the last oil change, those are strong magnets. Had a oil change 2 days ago, took out the magnet sump plug, only some tiny tiny little dust are stuck on the plug, guess my engine is ok, hehe!!!

Pics are here enjoy!!!

himmys saw your car in the car park, but didn't know who you were there. obvious you saw me in the car next to the round around as you was leaving. I say it was pretty boring, as its only show and shine. Will post some pics up soon.

I should be there

Only thing about them is, they don't come in many colour ways.

No, looks like a Merc.

C Pillar Bar Got it today, went straight on the car.

Can be more detail if i wanted, but it will do for now, hehe :angry:

Hey get some pics up on how you fitted it and finishing pics too, sure loads of people want to see it.

Thanks guys, Gaz was us at ACE Cafe?

Yes, i know that, because the offsets are wrong. been looking for some think spacer like 10mm, i got 4 or 5 mm ones in already. Idealy i wanted some deep dish. that would just finish it off nicely, what you think?

Reservoir Cover Sets

After a quick wash and have Tobys lug nuts put on

Thanks for your support guys. No worrys go for it, whatever it helps. Yea, cool. Just wanted to see how you got on with it.

No that long, but enough to go thought the wall from the bay to the steering column by the ign. If that helps. Very easy to do, just make sure you have the right wire on the FCC connected, if you have those wire the wrong way (which i had) the rev will go up and down.

Thanks dude, had a looked at your thread too, very nice. Any pics of the panhard installed?

Yea those are from you, works well. thanks