Hey people late rep!! I forgot about doing a write up! Just did a quick write up with help from my mate Rajaa!lol. Merry Christmas by the way!! You will need double filament bulb holders, cutter, scotch lock, insulation tape, and screwdriver for this exercise! 1) Dismantle the existing indicator 2) Cut the indicator wires 3) Wire up the earth with earth on the double filament bulb holders (black wire) 4) Wire the green wire from the holder to the indicator signal 5)(If you want amber sidelights to come on with your headlight sidelights) wire the red wire coming from the bulb holder to the sidelight power signal (using scotch lock) However if you want want them to come on as your sidelights ignore scorching the redwire and cut the sidelight light wire and join this to the red wire.. This may give a brighter bulb.. Although i didnt notice a difference when i connected mine to the sidelight. Repeat this step for the other side. So there are 3 wires in total on coming from each Double filament bulb holders. Black/Green/Red And finally just test it.. And you should have JDM amber lights at the front!! ;) Rickstar!