bucketep91

Cheers guys, hopefully the next update will be when its running! Shorty are u kidding? This has been a long project, took nearly 2 years before i got the finger out lol

Nice 1 mate wont be long now then eh? Greames indicator stalks on his ep95 plugged right into the glanza loom and mines doesnt gutted. Hopefully the lAst of my parts will come in the next couple of days so i can take it for a blast:D

Have u fitted the adjustable steering column? As it stands i have the 2 female grey 1s to worry about and those white and blue 1s from my pic, the 2 white plugs (in my hand in the pic) are coming from the drivers sill they are also disconnected but 1 of them fit in a silver box at that side that i assume is something to do with abs, dont think it belongs there tho? Other than that it should hopefully be ready to start when i fit the ignitor, map sensor and glanza stalks.

Arggghhh i fuxking hate wiring looms! The 2 plugs in my hand in my last pic are from the drivers side sill. Ill have a look 2morrow and let you know how i get on i have the same question up on tgtt and wee john says to cut the plug i need off the old na dashloom and tape off any redundant wires from that end. Would rather that worked so i dont have to change the rear looms.

So 1 of the white plugs from the drivers side sill fits the grey plug in the middle of the dash loom? Then waht do i do wit the other grey female 1 and the other white 1 u see in my hand here Ive also nowhere to plug the interior light on that side. Aye the fuel pump has a kind of round plug on it, is that the same as the uk spec? Thanks rob need to get to the bottom of this asap

I have a boot loom here too but ive not touched any of that. The plugs im having hassle with is behind the centre consol at the middle of the dash loom. The 1 that comes from the rear to meet the dash loom has the exact same female plug as the dash loom. The male plug u see in the pic is the end of the glanza loom thats not fitted as it doesnt seem to have a plug for the fuel pump? I have a couple of plugs at the drivers side footwell i cant make sense of either, theres a pic in my thread can u shed any light on those dude?

Wouldnt know where to start grant tbh. The looms scare me as it is never mind cutting them up lol

I txt geo earlier, had a missed call from him but his fnes engaged now Will i be able to swap that 1 plug from the glanza loom to the na loom or is it not that simple

I think he charged me around the same. He couldnt source me the right compressor wheel and tried to charge me for bits he had baught in error and just fobbing me off wen i was foning so i went down and had words with him and my turbo was rebuilt the next day with a £30 discount

Just tell him to get the seals done n be done with it, if theres any other bits needing fixed he will see it. U want me to come down with u hes scared of me haha

Mines a jdm starlet mate so my stalks are the same as glanza 1s bar the plugs Ive got a feeling im gonna have to change the dash loom again.

Bear with me, my fne spazzed out there ill edit it

Having a bot of bother with some wiring looms, was hoping i wouldnt have to change the rear loom in the car for the fte conversion so the na loom is still in at the rear all the way past the handbrake lever where it should connect to the dash loom. So the plug that goes from the rear loom to dash loom is a grey female plug, but the one on the dash loom is also a grey female plug. This is the plug at the end of the na loom left. And the plug at the end of the glanza 1 on the right I have the rear wiring loom for a glanza here but there doeant seem to be a plug for the fuel pump on it plus i

Will be fine to fit it bit why does he need to see it on the car? If theres anything else wrong with it he will see when its open. Justsounds like hassle fitting it to take it back off. Whos doing the seals for u? That wee guy i told u about?

Do the conversion yourself dude its not as hard as you would think. Im almost finished mines which has been pretty straight forward. Ive been sxared of the looms for months n months but once u start plugging it in its easy if you have it all. Ive got a full ep82 wiring diagram on my laptop, ill see if i can find it for u.

Gi motorsport in kilmarnock mate ;)

It fits, but its sitting too low im gonna have to fiddle with it again, its really tight tho. I cant wait greame, seeing it all back together with the fmic hanging out looking mean and not being able to drive it is killing me! Sure ill love wen its running. Far from the finish line tho ive still to buy some management and get it mapped, spole with chris from GI the other day, defo going to him for mapping! Sometimes waterworld open later on a sunday, the owners mate died the other day so the funeral could have been today tho so maybe thats why he was shut?

Its a car again! looking Better than it ever has with the bumper,wings and headlights properly fitted, need to give it a good clean tho Looked better like this i think Just about finished now, should have the last few bits 2morrow. An igniter, indicator stalks, map sensor and a td04 oil drain. Need to fill it with new fluids and fit those bits and it should hopefully start up Exciting

I think i might have wat your looking for andy, ill be in bishop brigs today if u want to pop over and have a look.

The easiest and most cost effective way is to buy a smashed glanza and swap everything over, u will make money back on parts u sell. I had a gt as a donor and made money instead of spending money. If i could start again id have baught a glanza and done the conversion with them both side by side then sell whats left over.

Not much of an update today as im waiting on a few bits coming before it will start anyway, went out and got new oil n filter, spark plugs,power steering and brake fluid and some paint etc. Got the rocker cover painted antracite and ive restored my headlights, going up to the car tomorrow to see what i can get done so if anyone knows what those plugs are it would be a great help. Sorry for the lack of pics ill get some tomorrow:d

Says lou mate Add an ser to the end haha

Is the blitz dv adjustable? Cld try adjusting it for more chatter? U can just block it off tho it wont do any harm.

Welcome back and congratulations! U do know you need to register the baby within 21 days yeah?

Only 1 ive found thats different so far is the 1 on thermostat housing