bucketep91

Off a breaker? Put up a wanted thread or ask jay, he might have 1

Pm'd mate ;)

Im sure the thermo housings are different, would be easier buying a glanza 1. the power steering pump is different too but u could use the 4efe pulley if its just that thats bent

The second is the exhaust temp, just tuck it away

I had 1 on my glanza, sounded awsome, not too, but rotted away at the back box

ive got your old 1 liam. Car is looking awesome mate why u looking fir a 1a0 bonnet tho?

Hopefully he shows up! Lol Will pop down with those other parts wen its done mark! Curious to see how it all goes;)

Thanks mate, too small for me tho there 14's! My car doesnt go low enough to suit them, they were pretty lost in the arches before i fitted the 20mm spacers. I had the speedlines shot blasted and im gonna paint them but its taking forever to smooth them back down so these will do till i get the speedlines finished. Hopefully getting an autospark down at the weekend to have a look over the wiring for me as im lost with a few bits. Im getting pissed off with it again! Cabt wait to turn the key and hear it fire up!

Couldnt say no to these today, will be selling them when i finish the speedlines tho! Excuse the lack of air in the rear tyre lol Fitted my 20mm spacers with them Apart from these i got the last of the parts i was waiting on and fitted them. map sensor, indicator stalks and i recieved a coil with no ignitor, my fault tho i explained it wrong to the guy, so waiting for a response from him to get the ignitor. Soo close now its doing my head in!

Thats a really tidy job mate! Looks awesome!

It can be put back in, but when its out you will throw it away, air con is usless. Real men just roll the window down All u need is a couple of spanners and a belt and 15 mins spare time. Be carefull letting the gas out tho, that shit can be nasty

Just pap the aircon mate we live in scotland, how often are you gonna use it? It uses your fuel, your cars power and it wieghs a ton and takes up a lot of space Bin it

I used 1 of the pipes that go to the bulkhead from the n/a engine.

Yes! />http://www.youtube.com/watch?v=vFZ2eQ0PpW4

Was only joking mate but if he will sell me them thayd be fooking awesome!

Those are the same aa my wheels! Can i have the centrecaps liam;;)

Thanks dude! Ill give that a go although as you say it might be totally different, mines. 99 and the looms are from a 96 i think. Its been a pain in the arse, those plugs from that side are white though? The plug in the middle is grey? Domt suppose u have a pic of what you have done? ive already had my snips and connector blocks out so hopefully ive not gone too far lol

What rpm are u getting full boost just now?

Any one got any ideas?

Congrats colin! Defo the best feeling you wIll havein your life! And dont worry i was crying like a girl wen my son was born too haha I can remember standing there thinkin.. Fuck, i halfed in for this!

Look like super leggraz (sp?) to me

Just go down and take the car back!

Lol feels like its taking forever, i brought it home yesterday and put it in the carpark behind my flat, working on it today and was told i have to move it on saturday as theres gonna be a gala day in the carpark! Wtf! Yours must be done by now aswell shorty? If this were a race it'd be a photo finish :haha:

Complete wankers! Quoted me 80 quid to set up a fpr and fcd at 1bar, handed over the keys and came back a few hours later and he told me it was 180. I told him where to go and gave him 80 quid. If id known how bad a job they done id have gave him a slap and no money. Fuel pressure was set at 1.7 bar! Boost at 1.1 bar and the headgasket was fucked He also used half a tank of fuel. Oh and my bottom end shit itself soon after

Had a wee look today, chopped the plug off and started joining wires. Theres 10 wires on each plug but only 6 or 7 match up I have these left on the plug from te na loom And i have these left on the glanza loom Tracing those green 1s back on the glanza rear loom it looks like there for the rear lights? Will i need to split the full loom and see what goes where?