Starlet__SR

http://www.ukstarletowners.com/topic/96675-changes-to-marketplace-feedback-sections/?p=1138432

Unusual.

There's two different pulleys listed for the 5EFE/FHE. As below. The twin pulley is also fitted to the 4EFTE.

Chances are the clutch master/slave cylinder will have been passing, mine did the same till they were both renewed.

Might be pushing it at that. Id personally go ORC.

I ran one in my old glanza and never had an issue. Then I fitted one to my corolla t sport. Again no issues after 30k on the corolla and 15k on the glanza. You could always play it safe and go for an Exedy 3 paddle.

Same can be said for most aftermarket clutches. ACT even had the same issues as the Comps. But these were teething problems. Not ongoing issues.

4EFTE and 5EFE both have a dampened pulley

Sounds good. Get some pics up!

Never heard of any failing. I've ran two so far and cant complain. Apart from the usual paddle clutch downsides lil. The ORC is costly but do remember it comes with a flywheel too. Shipping is a little slow but you can pay for quicker delivery.

There's been a few fail in Celica/mr2 circles also. Shares a similar setup too.

Easiest way is to stick a plumb line over each rear arch. Measure the distance between rim and the plumb. Adjust to suit. Tighten then give the car a run. Recheck then do wheel alignment

Its possible with one person but a struggle lol.

Competition clutch or ORC as above.

Adjustable panhard rods, RS*R style if possible.

It depends which bar it is, some can be adjusted on the car, others have to be removed.

I think i've seen them matey. £500 is my maximum. And the tyres are too much for what I want lol.

Bump! Cash waiting!

Not really haha. What does the RSR brace look like? And yes, in black for the OEM look.

Not gonna hurt nothing sat up there, store it and save it for when things return to normal.

Cant you find yourself a little garage near the mother in laws? Think carefully before you sell it though.

Both are fitted with bearings. I'd love to know exactly what you mean??? Usually when a bearing runs dry it will produce a squealing sound.

Looking for some wheels for the GT. Something along the lines of Enkei, OZ Racing, Compomotive, Volk/Rays, Sparco's. Only interested in 15in wheels, need to be in straight/undamaged condition if possible. Preferably without tyres unless they're new/barely used. No Rota's/Japan Racing or wheels with added scene tax please! Looking to spend £500, maybe more at a push. If you have a clean set of SR Speedlines please get in touch!

The sprocket should just slide off, it's clamped by the bottom pulley. Just the woodruff key to keep it located.