Maz90
-
Content Count
466 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by Maz90
-
Aye its alot easier with it off.It only takes 5 mins to cum off,but its quite awkward to get into the 2 bolts.
-
Yeah a know a few folk with starlets that done that
-
Yeah ano am going to glad you's talked some sense into me as ad end up blowing my engine up
-
Bump
-
Tell me about it,a cable tied them tight last time.Am a better with hose clips ? Just its easyer with the ties.
-
Aye but they were gash and a lost the standard ones when i changed the actuators over.Pish no havin any power ,especially just after a put the manifold and that on,less power lol
-
What is the difference between them ? Everyone says the hks is shit and recks your engine,but they seem more popular.What one would you recommend if running 12psi with a decat,mani and exhaust ?
-
What hoses do you's use on this ?Because the hoses on mine are shite and am not boosting atall because there bent in half because there so soft.,when a put the foot down you can hear lots of air coming out everywhere so think its my hoses.Also not dumping because of this.Any pics or that would be good.Cheers
-
What he said ^ lol.Sometimes its quite hard to pull out,because obviously their not supposed to stick but will cum out with a good pull.
-
Could be the brake switch is jammed on,thats what happend with my old car.Just had to pull it back out
-
Yeah should just screw off if not just hacksaw it off if your not needing it again
-
Yeah check your actuator.Make sure none of the hoses are crimped over because the boost want cum through properly,like a found out.
-
Not sure of the weight,but do know they are quite heavy compaired to rotas ect.You will hardly lose any power,its if the wheel is a bigger size like 17" or whatever you will feel a difference in power/handling.
-
It looks a bit like the old micra
-
Just seen this greddy boost cut controller on envy performance for 78quid.Are these any different or better than the hks ones ? http://www.envyperformance.com/index.cfm?f...FTOKEN=89804087
-
Will one off an Mr2 fit my ep82 ? How do the fcd's differ between cars ?
-
Yeah it is rather big,looks like it should be on a skyline or supra
-
Well its not the best grade of s/s so will dent quite easily, but its ok for the money a suppose.Pics are in the build thread bit.
-
Just some mdf.Well a took the back seats out for my harnesses to bolt into and thought ad make a even floor from the boot to right behind the front seats.If it looks shite ill just take it back out.
-
Looks good mate .Have made a fake floor for the back to cover where the rear seats were,going to carpet this at some point.
-
Another update.Got My cat back system on,then bought a decat and mani and fired that on too,dumpvalve is on and so is hks actuator and boost gauge.Going to get some decent samco hoses next as the ones that are on are gash.Heres some pics
-
Very nice project you got there mate
-
Well the mani,decat and exhaust is fitted know.The exhaust is not to loud atall.Quite a nice sound off it.Will get a video up tomorrow.
-
I thought it was quite good.But some of it was just a bit to far fetched,good film tho.Do you think this is the end or another one too come ?
-
Nice pictures you got there.I like the 1st one the best
