Jump to content

enots

Club Member
  • Content Count

    842
  • Joined

  • Last visited

Everything posted by enots

  1. **UPDATE 6/3/22** Slow with the updates but finally got around to getting some fresh metal on the car this weekend. It's all a learning curve for me as I'm basically trying to teach myself to weld along the way too so alot of trial and error but I'm happy with how it's gone so far! Couple more bits to finish welding up on the arch and plate up the filler cap then I'll be cutting the drivers side out to do the same so they're both identical. Ended up with a bit of warpage but ill sort that once the fuel filler is patched up
  2. Thanks man! Yeah it'll be worth it to see it finished again and at least I know its clean this time around not just packed with filler! ๐Ÿ˜‚yeah they definitely pulled out all the stops for it! Yeah it'll defo be worth it once it's done!
  3. **UPDATE 28/11/21** Another weekend of finding more rot/dodgy repairs by the previous bodyshop. After pulling the rears apart I had to investigate the fronts and it was just as bad. Rotten folded metal folded against the "newer" metal. A shit load of filler and more woodscrews pulled off I got to see what I had to work with/repair. Pictures speak a thousand words anyway Wood screws through the original wing and in to the fibreglass skirt and some fantastic "welding" hidden with a mixture of fibreglass/filler anyway all 4 corners are fu
  4. Yeah I'm in way too deep with it now to give up on a bit more rust ๐Ÿ˜‚nevermind we'll see how it goes over winter!
  5. **UPDATE 21/11/21** Well tubbing the arches threw some problems/decisions to be made with the car. During welding because of the heat the filler on the arches cracked, I was expecting this which wasn't the issue the problem was once again down to the previous bodyshop who had done all the work. The rear arches had around an inch of filler on top of them which also followed up the whole of the rear quarters ๐Ÿ™„ Upon removing all of said filler I kept finding more and more problems. More rust, the original arch folded over against the new arches had started rusting the new ones, the ori
  6. ** UPDATE 15/05/21** Bit slow since the last update due to various family issues/change in job and general lack of motivation due to covid, but finally sold the big old banded steels off the car and picked up some new wheels yesterday. I've dropped from a 16" to a 15" but stuck with the same width and offset as before. Much prefer the new wheels and obviously alot lighter! Hoping to crack on with this over the next few weekends now and get somewhere with finishing tubbing the rear arches then it's a few final bits to the bodywork and paint ๐Ÿค˜๐Ÿค˜
  7. Just had a good read through this!! Car looks awesome man! Definitely be getting myself some of that manifold paint to try too makes it look alot tider!
  8. Yeah I do wish I'd of been able to pick up the bootlid/wing it had on it when I collected it but it had already sold sadly! Definitely something I'll be looking into once its all back road worthy!
  9. **UPDATE 24/02/21** So even though the shell has had arches welded on to it the bodyshop that did it decided rather than cut the original outer arch away and leave alot of clearance in the rear arches, they would instead just fill it with filler/fibreglass ๐Ÿ™„ As I've decided to do it properly this time round i spent the weekend cutting said arches to pieces to increase the amount of clearance I have in them. Its basically going to be a very basic arch tub of sorts but will mean I gain at least an inch and a half of tyre clearance so I keep the 8j on the rear at a zero offset. Rea
  10. Thanks man! hopefully it'll come together a bit more over the next few months
  11. Thanks man! Its definitely nice to see it all in one piece again! The wheels do suit it very well but there's a few issues with them. 1 they're basically a fancy banded steel so the weight on them is ridiculous๐Ÿ˜‚ 2 because of the size of them and the fact the wide arches aren't just a hollow thin arch they scrub really badly on the front unless I run it at the height it is in those photos. Which is pretty high on the coilover settings, which brings me to my last point 3 it handles awfully on them ๐Ÿ˜‚ i dont know if its the weight of them in general or a mixture of it being so high
  12. Realised half the photos of the build had disappeared due to stupid photobucket links so I've just spent the last hour re uploading them all ๐Ÿ˜‚ Anyway.. ** UPDATE 7/2/21** One of my quadlights has always had a broken bracket, never really bothered me but it was never bolted on securely and this time round I've told myself I'm doing it all to a bit of a better standard. So I picked up a spare headlight but it needs the glass swapping, haven't got round to that bit yet but had it all bolted back up today and have fitted some better quick release bumper clips. Probably the f
  13. Super long shot I know but if anyone has a set they're willing to part with give me a shout!
  14. Amazing cars i owned the earlier 185 gt4(slimmer one) for a couple of years great fun!
  15. Yeah no doubt! I logged onto tgtt for the first time in years the other day too and its the same there sadly! Yeah ill be making my way through alot of these build threads over the next few days for sure!
  16. Yeah it had gone alot quieter the last time I'd logged in to be fair! Shame really there's alot of knowledge amongst these forums and its usually the same old questions you see getting posted in the Facebook groups! Thanks man hopefully be some good updates over the next few weeks/months
  17. Soooooooo... I have no idea if these forums even have the traffic they used too but after logging in for a nose I thought I'd put a little update 5 years down the line ๐Ÿ˜‚ Car has been sat in my old unit for most of that time, with endless issue after issue which killed any love i had for the car... But recently moved to a new unit and I've been spending every free hour I've got over there getting it sorted and its finally playing ball! Ive got a fair amount of body work to re sort on it and it'll be getting a proper paint job this time round as there's a booth next door to my
  18. Seems I've sorted it! Swapped with another throttle body I had hanging around and its dropped to 1600. Still a little high but the engine hasn't run in well over 12 months properly so I'm putting it down to that for now and we'll see how it goes
  19. Right... so with the engine running and inter cooler pipe off if I block the throttle body it cuts out. If I block the little vacuum hole inside the bottom of the throttle body it cuts out. It's also pulling alot of vacuum through that hole which tells me theres no vacuum leak. So to try eliminate that hole as its in front of the butterfly I block the vacuum lines underneath the throttle body, both of them. The car still runs straight up to 2600k. Even with those vacuum lines underneath blocked off I'm still getting vacuum pull through that little hole inside the TB so I'm guessing it pu
  20. Yeah I've had the icv off and cleaned it will give the throttle body a good going over tomorrow too Cheers for the suggestions ๐Ÿ‘
  21. Yeah I've gone over everything like 20 times dude haha it's what I first assumed I'd done was leave one unplugged somewhere. Can't find anything.
  22. Finally getting my hands back into sorting the gt and after fitting new fuel lines over the weekend I fired her up for the first time.... idle went straight to 3k ๐Ÿ˜‚ I assumed vacuum leak so I had the inlet manifold back off as I'd recently removed it and assumed I'd left something. So that's all sealed back up cant see/feel any vacuum leaks whilst spraying carb cleaner around there with the engine running yet it still wont idle less than 2600 rpm. The idle screw is wound all the way in and I've even disconnected the throttle cable so the throttle is as shut as it can be yet it still idles
  23. just link the power cables from one to another shouldnt be too much of a problem obviously sender cables will need to be individual
  24. Yeah I've seen this knocking about too!still got that steering rack too James??
ร—
ร—
  • Create New...