toadthepimp

You still got the downpipe?

I'd be interested in the injectors and possibly the brakes

Damn it! I was gonna pm you tonight!

I'll take your number too please

Thanks man! I'll try a few things No idea what the numbers mean tho.. Lol

Just took my glanza for mot and all was fine except emissions.. On all tests the CO was about 6.5 - 7% and the lambda was 0.82.... Both fails, but HC passed (just - by 4ppm!!) any thoughts would be good I'm thinking boost leak, or too high fuel pressure or timing?! It's got fuel pump, fpr, cat was fitted, ct9 turbo, runs a little rich on low rpm and a bit lean on high rpm.. Had a lot of stress with the car recently, and was hoping it'd go we'll for a change! Not driven the car for a month and a half!

Would the company who fitted have done this? What info do they need to set it? Or what would they set it to?

I don't know if they set anything up or not, Does it make much difference? I'm using the supplied kaaz oil for break-in and more on the way for after.. It's just real clicky, don't mind breaking it in, just sounds like its gonna break a shaft or something! Anyone else done this and found it so loud and seem to stress the shafts so much when clicking?

Oh right! Lol it is brand new, but literally sounds like something's gonna snap, and I'm only goin less than walking speed... Don't wanna break anything!

Yes, just like that morgey! Same noise at that same frequency, but at 3 mph... You free tomorrow night morgey? I'm scared to drive it... Lol

It sounded like something was gonna brake. Didn't even take it out of the unit.. Looking at the shafts when it does it, it's like they get stuck when going round.. It shakes the wheel..

I can safely say, the LSD fitted in the one with the cast/ ribbed end

Just got my gearbox back on with new Kaaz LSD fitted at local shop. It makes a fast clicking noise even at like 3 mph. Even does it when just being pushed.. If I jack the front up and start the car, put bit in gear and turn the wheels wherever, there is no noise.. If I lay down and push/pull the car with a little bit of turn, I can see its like the shaft gets stuck and clicks round.. Never had a diff on fwd or even one brand new! Don't know what noises to expect, and don't wanna break anything.. It's quite a loud noise, and can shake the car quite bad..

I hope so!! I literally just dropped the box I picked up yesterday (which has the cast cover) down the repair shop. I'll post in here their findings after the weekend

Just took my glanza gearbox in to have a LSD fitted and it turned out to be a uk spec box, so didn't fit the crown wheel!! Pretty gutted as I'm waiting on it to finish my car... Just bought another one off a lad breaking on gumtree but before I take it to the shop id like to be able to know it's not going to happen again to avoid labour charge for them having stripped the box down... Any tips would be awesome, thanks.

Where are you? I need a box for my glanza asap

Ok cool, thanks for the surprisingly quick response! I will confirm this when both are up and running again, but thanks for putting my mind at rest

Just to clear this up, replaced the vac tubes on top of engine and it still done it. But only the first two attempts, then it just revved right up! And is now fine! A bit strange... :/

Hello, swapping engines between two glanzas and one has one lambda and the other has two?? I'm slightly concerned that neither will run right when done! I'm hoping someone on here will have come across this before and can help... Thanks in advance

It was once an auto so not running tps.. And it idles fine, low compression would surely make it spluttery? Sparks might be it, got standard ht leads...

Hello, today the glanza decided to not rev above 2k. It idles fine (although perhaps a little smokey?) but out of gear foot to floor, it's as if the limiter is now 2k and it just slowly bounces between 1.5 and 2k.. It's therefor totally undrivable haven't really looked much yet as I had to go to the dentist... What a great day!! Lol Any thoughts are gratefully received

Got my c-pillar bar and engine damper today, all is good! It's nice and shiney

ah ha! east anglians! im near norwich, and would like to see some fellow starlet drivers!