jeffrosie
-
Content Count
344 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by jeffrosie
-
-
So would a Glanza V complete exhaust system on a n/a be a good upgrade esp as no cat in it too?
-
Does anybody know if the std turbo system is larger in diameter than the n/a system and whats the diameter?
-
-
Use a n/a with forged internals and steel headgasket, uprated injectors and Corolla inlet. Exhaust manifold go top mount with suitable downpipe so you don't need turbo oil filter relocation and exhaust system again aftermarket - so many available. Suitable clutch and i believe MR-S lsd fits into these gearboxes. Piggy back or standalone to keep it all in check also should have its own built in MAP & knock sensor. And intercooler with pipework.
If any above info is wrong, those that have done will correct it. But i'm sure the above should work.
-
Starlets speedo drive is mechanical. so the difference will be more the faster you go but not by much. Do the correction for 40 and then check with GPS at 30 and 70 which are the most common speed limits. At least you'll know what the errors will be. Also by readjusting the needle position on the speedo, the spring tension will change. So the errors may be even less.
-
Watching this
-
Easy to pull off the needle with a fork and push fit it back.
Turn speedo needle to 40mph and hold in position with fine needle nose pliers. Remove speedo needle with fork and refit at 30mph. Press firmly to make sure it's fitted properly
Job done
Go for a drive and check all is ok
-
UK 98 EP91. Are they +ive or -ive trigger for the central locking?
Also where can I connect the module wires to?
-
Isn't the Corolla throttle body and the EP91 throttle body the same esp in diameter?
-
Nice clean car mate. Will be an awesome sleeper
-
Ohh and swapped the alternator from the Glanza because the original was screaming, and although it fits and plugs in and works, its a smaller unit! Couldn't read the amp output, are they different?
Left -UK Right - JDM
-
Reset ECU and topped up with VPower
-
-
My alternator has got the dreaded whine! I have found the guide of how to dismantle, but question is, does anybody know where to get the bearings from?
-
No need to cut as Glanza discs will fit fine in there with slight bending of the cover.
-
Just wondering where you got it from as the colour match looks great
Car paint from Spray Store in Brands Hatch
-
Paseo dials easy to fit. I have the pin out on this thread. Was easy to follow circuits and repin plugs.
-
Lovely mate. I just got one of these in 3 door. Where did you get your paint from?
Which paint? car paint from Spray Store in Brands Hatch and manifold paint just random rattle cans at work.
-
Cheers guys. Cam cover is being prepared too. Same colour but with the colour being carefully rubbed off the highs.
Got a replacement alternator but it looks all manky. Love to take it apart and clean it/grit blast the case. Where can I get new bearings and brushes for them?
-
Did this today, but will fit over weekend
-
EP70-PT love the denim look. Will the seats be Denim too?
-
MR-2 check these out and get even more confused!!!!!
-
Clock is horrible, looks like swollen pussy
-
@fmuscle are the Paseo discs same as GlanzaV discs?
Glanza V std exhaust
in Intake, Turbo & Exhaust
Posted
Asking as I have a stainless Glanza V system and willing to exchange it for a good condition std Glanza V system and money my way
If no interest, I'll fit the stainless on with a 200 cell sports cat and an extra 16" free flowing box to keep it a bit quiet and legal.