Jump to content

1990timeismoney

Member
 View Profile  See their activity

  • Posts

    759

  • Joined

  • Last visited

 Content Type 

Everything posted by 1990timeismoney

  1. 1990timeismoney
    That sounds bad how do I check. Is it common to have a bit of oil come out now and again
  2. 1990timeismoney
    Hi all. Opened the bonnent this morning to see some oil around the bottom of the breather filter and on rocket cover any ideas of what this could be. Thanks Luke
  3. 1990timeismoney
    Car looks good are you on the isle of wight couple people over here with ep if u need any parts
  4. 1990timeismoney
    http://www.ukstarletowners.com/topic/66791-sard-fpr-and-un-cut-back-shelf-ep91/#entry867786
  5. 1990timeismoney
    You could by a plug and play ecu
  6. 1990timeismoney
    I used a jam fcd I found it better than the hks I just wired it in
  7. 1990timeismoney
    I would get a wideband fitted or take it to a tuner could save u a engine
  8. 1990timeismoney
    I would get a wideband fitted or take it to a tuner could save u a engine
  9. 1990timeismoney
    Im not completely sure mate 12 is of set it to 10 and if still hitting fuel cut turn it down a bit myn was set to 8 do you have a wideband fitted
  10. 1990timeismoney
    http://www.toyotagtturbo.com/forums/showthread.php?14965-HKS-FCD-Diagram-for-EP82-and-91-*
  11. 1990timeismoney
    Thanks for the reply engine is standard running td04 at 1 bar with all supporting mods will 1.1mm be ok for this setup
  12. 1990timeismoney
    Sold
  13. 1990timeismoney
    Your rite forget my reply
  14. 1990timeismoney
    Its better to run on bumper side as it draws the cold are through into the radiator as apose to drawing the air fron hot engine
  15. 1990timeismoney
    Hi all does anyone now the standard gap size for ngk spark plugs. Thanks Luke
  16. 1990timeismoney
    I use to run twin fans on my rx7 it made a big difference if the air flow to the intercooler is restrictied by the bumper it help keep temps steady. if they weren't switched on intake temp rised.
  17. 1990timeismoney
    That is amazing great work
  18. 1990timeismoney
    Bump still for sale £60
  19. 1990timeismoney
    Hi how much delivered for the rear strut brace to Hampshire
  20. 1990timeismoney
    Would you sell just the springs
  21. 1990timeismoney
    I no its rubbish theres a guy on here with the hrf in let which is for sale soon but not sure who it is
  22. 1990timeismoney
    Must be some parts around still cash waiting all goes into a hrf build
  23. 1990timeismoney
    Bump
  24. 1990timeismoney
    http://www.boostclassifieds.com.au/advert/2219244-1988-Toyota-Starlet-for-Sale.html
  25. 1990timeismoney
    128mm = .5Bar or 7.25psi 123mm = .8Bar or 11.60psi 121mm = 1.0Bar or 14.50psi 119mm = 1.2Bar or 17.4psi
×
×
  • Create New...