Jump to content

Gtstu

Member
  • Content Count

    78
  • Joined

  • Last visited

Everything posted by Gtstu

  1. ill be up for this . is it to late for a stand to be organised?
  2. I work for the AA so if any one is intrested PM me and i can send a link to get cheap cover with the latest discount etc, you build your cover to suit your needs but roadside and relay to cover the person works out very cheap.
  3. the black ep82 with the red rota GT3's is mine
  4. BHP figures are pub talk every dyno is different its how the power is delivered and the most important thing the driver.
  5. 1) Drongo boi 2) Matt Richmond 3) Socks 4) H_D (sunday only) 5)Michael (weekend) 6)Gtstu +1 is there camping?
  6. ill be going from junction 21 on the m25
  7. are we collecting tickets at the services?
  8. boost control sensor for megasquirt
  9. i think if you send the ecu to Ed at fusion motorsport he can remove the NATS
  10. 1) Steve GT 2)Ollie Ryan 3) theminiguru 4) mikey b 5) nazzuro19 You're going, the starlet stays, its final haha! 6) Starlet__SR 7) Starbuck.... WOOT! 8)Nads 9)Matt1878 ---->JAPFEST VIRGIN 10)josheyboy006 + one 11) Shavnh 12) Gsyglanza 13) Ro55ifumi 14) Hair 15) Taggy 16) Dean @RW-Developments 17) LukeSR 18) Gtstu +1
  11. i got a set from my local motor factors
  12. Gtstu

    Uni chip

    paul hills maps them and he is mobile
  13. Have you got a donor wiper switch you could try? also have you disconnected the rear wiper motor and see if it blows then? And it is earthed through the motor to the bulk head lol
  14. sounds like you have a short circuit after the fuse check with a meter to see if its shorting to ground at the fuse and trace the wiring.
  15. i used ryan at 2bartuning very impressed
  16. 1) Socks 2) Raffa 3) josheyboy006 4) daz gt turbz 5) ollie ryan 6) N80Jamie 7) whitegv Starbuck 9) iamlegend 10) torturedglitch 11) LukEP 12)Jamie1st 13)BLITZ 14)Driver 15) String 16) Lew777 17)Ro55ifumi + Hair 18) mattyd 19) Starlet__SR 20) Steve GT 21) LukeSR 22) Stavros 23) nastyrash2003 24) rob_bower (work depending) 25) K24_EP91 26)Gtstu (work depending)
  17. Gtstu

    EMB & EMU

    i think you can use the emu software on the emb but you need the correct cable for the emb the emu just uses a printer cable
  18. you could add a emanage blue / ultimate to it to fine tune it etc
  19. take the oil pump off the bolts with the yellow dots on
×
×
  • Create New...