The Toffinator

Will have a crack at them, named driver on direct line was 1600, which isnt bad? Just confusing about cis though

confused.com is cheapest at 2995, then it continues going up, then CIS, who were quoting 1085, have not managed to do it online so i rang up, they now want 3300. so its gone up more than 300% in one week? how? Really need to get this sorted as i have passed now and it should be on the road

Aye i know, you should see it now its been properly cleaned And thanks alot people, im well chuffed. Also got it lowered today, will put some pics up when i get time ;)

I JUST PASSED! Booyaa insurance will be sorted next few days, buzzing ;)

Yeh thats true haha, it must be back pressure, or the ecu hasnt/cant reset to what it needs to gain more power. if thats the case it needs properly setting up, then you should gain a fair bit with that!

Did you reset the ecu and let it idle for a while after? whats best is disconnect the battery overnight, then turn the car on and let it idle for a while (10-15minutes, and make sure the weather is fairly average) and then restart it, it should relearn alot faster then. As you probably already know, ecus only learn a small bit at a time, to learn with the enviroment, dramatic changes it may just reset to base settings. Something to try anyway?

Well that sounds wrong doesnt it? obviously it loses too much back pressure with the mani. next step for you is to drill out your current cat, buy a new one and see if theres any difference when its fitted or not? And there you go then, you will be loaded compared to the other losers

Thats an awesome figure then, especially just with basic mods! i wonder how much extra a mani and decat would make? i think well over 90, mabye a 100 with a thinner headgasket, perfect timing, and mabye a remap if its possible? And about converting it, you also wont lose all the hard work you put into it, it would still be green, and you know the years you have kept it you have looked after it! Just keep saving, and try not too spend it on booze at uni Chris

I used white spirit on a rag, its fine to use as long as its not on there for ages and ages. just make sure you wash and polish underneath after, but i bet you will be doing that anway!

Thanks people, i just want them wheels and even though it says in the title, im not sure if it would fit well!

What about these? these are offset 40, isnt that too much? http://cgi.ebay.co.uk/15-GUN-EVO-ALLOY-WHE...#ht_10216wt_911

Had a look around but i cant find the info im looking for, i know 15s are the way to go, but what offset, width etc is the best? Thanks!

Amjad can you make a quick summary of engine mods you have done to get that power? and please tell me you got a dyno video!

It is pretty good stuff, just make sure you dry it after as my car had marks when water sat on it, these stopped when i used some of that ultra gloss stuff

It would have enough torque when you turbo it! especially if its a stripped out car.

Shit you spent that much! wow And lol i know what u mean, arm pain hahaha

Its just time consuming isnt it,thats the only problem! and its worse when its warm haha

I left the super resin for about an hour, and the ultra gloss for about an hour and a half, so it was on long enough. Mabye just reapply the ultra gloss another day.

With the SRP, i went round the whole car, then by the time i did the whole car waited about 15minutes then started buffing it off from where i started, so it was on for a long time! And yeh i know its a sealant, but if i just SRPed it water would mark it when it settled on it, it doesnt really do it now i put some ultra gloss on it!

Okay okay! i need to invest in some better stuff then, i find the polish good, but it marks when water stays on it, and then this ultra gloss stuff was awesome the first time i washed it, and now its gone to how it is in the pictures, how do i make it better? the first time it just sheeted off! And lol i know its beading, i just couldnt remember it

Washed and waxed it a few weeks ago and never took photos, first i used Autoglym Super Resin Polish, then used Extra Gloss Protection. Look at the water balling on the surface, this is just after i hosed it clean.

Come on guys! someone must be better with this stuff than me!

Dude that isnt water beading! get some autoglym on her!

What pissed you off about it?

The cardigans was it off the start of grandturismo 1?? And totally addicted to base? cant think of more yet lol