scoobykilla

Awrytee sweet well thnk its going to be emanage Blue because its in my price range, then adjustable actuator and HDi pront mount me thinks If i get an emanage blue and put it on the setup i currently have on the car, will it need to be mapped to that setup???? This is prob a really thick question lol

Azz could i run a standalone without needing to upgraded any other parts ??? Whats best Greddy emanage Blue or what ??

Hey folks, rite i have a few mods on the car and its just hitting fuel cut when i am doing a bit of spirited driving . Anyway so far i have upgraded exhaust mani and decat pipe, Nur Spec R exhaust (full system), blitz BOV ans an RX-7 TMIC. I have deristricted boost on 1st and 2nd gear. I would like a little bit more power but mostly i want to be running the car safely i.e not destroying the engine etc, i also want to get rid of the fuel cut issue. From the above, what should i be purchasing/doing next to get the car running anythng from bout 150-170BHP safely with no fuel cut or worries ab

Awryt cheers Mickey Boy al put it back to standard tonight

Nope, really need to get, whats best to go for ??

Mickey boy i have the glanza and it has the 1st and 2nd gear boost restriction removed but it was done when i bought the car, how do i pipe it back up ?? Photos would be ace. Also i have an Rx-7 tmic on, do u think if i put the standard tmic back on i could solve my fuel cut prob ??

Awryt klkl so uprated actuator is a defo, will it be doing the car any harm if i am running about with it hitting fuel cut ? And how easy is it to fit the uprated actuator ?? Sorry for all the questions bit of a noob with fuel cut and stuff

Awryt ok, sorry for being stupid but, i thot if it was fuel cut the engine cuts out ??? If it is fuel cut what should i be looking at doing to get it fixed ??? Cheers lads

Well i am away to put my car in to get a diagnostics check done. The ABS light came on a while ago but thats not whats bothering me. Three days back i was doing a spirited bit of driving (nothing over the top) and my engine management light came on, i arrived at my girlfriends house and turned the car off left it for an hour or two then went to drive home and the management light had disappeared. Anyway last nite i was driving about and it came on again car seemed slightly slower on pickup when light was on. Finally drove to work this morning and no light again and pickup is back to norma

Drivers side seatbelt if in one piece (no fraying) ??

Ye a pic would be ace dude, not fussed if they need a bit of TLC

Haha ace, its kinda like an addiction when it comes to starlets lol. Random question but do you know anybody sellin 15 inch alloys up in the northeast because cba travelling too far t see them lol

Awryt sounds lyk a fun challenge lol. am out the other side of Ellon, na got a Glanza, ma 1st starlet and tempted to go for a GT aswell lol

Taggy sounds like a plan. Couple questions tho, i have a problem with the wheels spinning a lot in first second and 3rd gear, if i increase the power to say about the 180 to 190BHP whats the best way to stop this (i dont have that heavy a right foot either lol). Plus i kinda wanted to keep it below 1.0bar or is it safe enough running at 1.0bar as i use the car as my daily car ??

Standard boost as far as i know, HKS mushroom filter in standard place (up at back of engine bay)

Hi folks got my V back on the road today its got the below Toyosports mani and decat Blitz Nur Spec R full system RX-7 top mount I know it wont be much more than standard power, but what BHP do you think i would be running ??

Hi mate i take it that this will go straight onto my Glanza and i shld only need to get it remapped lyk ?? How much y wantin for it ?

Haha. Awryt sweet well av just got standard black boring ones so prob go for samco ones or tht 2

Hey chris, u through in aberdeen much with your GT ??

Awryt cheers micky, al get cracking withit tonight

Awryt sweet, would it matter if i used a bolt that was fully threaded or does it need to be just the end of the bolt to be threaded ??

Hi people, i have just removed the rear shocks from my starlet and afraid to say i had to hack the bottom bolt off on the passenger rear. does anybody have a part number for the Nut,Bolt and Washer ? Or can i use any old nut,bolt and washer thats the same size ?

Ye thats what i was thnkin, wondered about slipstreams in lyk monster green but green and blacks bn done quite a lot before

Rite folks, putting some pennies together for some nice new rota alloys but cant quite decide which ones to go for. I have a Black 99 Glanza V on Spax 40mm springs and am going for 15" alloys These are my options: Rota GT3s balck with blue anodized rim Rota Slipstreams flat black Rota grid V's in black (to spray in candy purple later) What do you folks think ??????? Opinions Please

Cheers Jamie, liking the name, i'm a Jamie to lol. Any idea where to get hoses kits that suit the civic rad setup ?