-
Content Count
1696 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by Sefton-EP91
-
-
-
It's for 97 spec thanks pretty sure it's face lift R plate
-
I am after a pair of glanza fog lights for a face lift would be nice if came with wiring but not a must. They can be new or used really not fussed. Would be nice if they can be posted.
-
When I take off to drive I get a knocking noise, this happens when I go into reverse also and take off to go backwards. I have a feeling it could be the to strut mounts, you guys got any suggestions?
-
Thanks I thought this would be the case with the green cup! I just hope mine are easy to do lol
-
What's involved in the removal?
I assume they just pull from the gearbox?
Thanks
-
merry christmas to all UKSO members!!!!!!!
-
again thank you for all the info lads, like i said previously these are my plans for the new year.
I've done this mate, you need a decent mani with external wastegate port, you will also need either a downpipe making with a dump pipe from the wastegate in it or if not a screamer pipe which avoids things in the engine bay.
You will then need a wastegate with spring, I have a Tial one but some people recommend the cheaper ones.
As for the internal wastegate, either get the penny welded up, get the arm the actuator attaches to tacked(if you ever want to undo this you can just hammer off the tack which is how i've done it), you can also use a bracket or even just keep the actuator attached with no vac lines on but this is somewhat of a bodge.
You won't really gain any power but I feel it allows you to use the power of the car as i found with all my mods and a ported wastegate i would creep to fuel cut in seconds even at 0.3 bar, with the external you can set it to 0.8 bar and spool up rapidly to that and it will hold there without overboosting or dropping off significantly.
what bhp have you made on this setup by this i assume you have a emb/emu?
-
Thank you guys for all the feedback the reason I ask is because in the new year I am planning on going externally gated on ct9 setup then get emb/emu then mapped to suit.
-
I see so the wastegate takes place of the actuator. Would I need to be running any specific ECU to run this or can it be run on standard ECU? i assume can be ran on standrad so long as I stay below fuel cut..?
-
Welcome to UKSO mate!
-
What would I need to do to get my car running externaly gated? Obvious things mani with w/gate port but is there anything I would need to do to the turbo, would I still need an actuator? Thanks
-
welcome to UKSO matey
im sure you will find every bit of info you need here!
Nice V you got aswell
-
You in the ortons? Sefton
na mate im in fletton, couple of mins away near the peterborough football ground
liturally two minute drive from showground.
-
Welcome matey
-
Welcome matey
-
Round the corner from me, I'm up for this! I'll be going either way lol
-
Welcome matey
-
you dont know that it runs? or that the other side isnt caved in to be fair
good point
It's all good as I asked about engine and a few other bits
Wants mega money for everything
thats typical aint it lol he obviously just after the money, wonder how much it cost him to get over here..? must be alot if he wants alot of money for everything its still got japanese plates on it lol
-
it just seems a shame to waste a perfectly nice example! as you guys said there getting more rare aswell! this is why there getting rarer because people are breaking them
-
This guy must be crazy! such a nice example, untouched! and hes breaking it!
-
I'm sorry for doubting you guys but you are right. It's coming from my bottom pulley. It's just slightly catching on the timing cover. The crankshaft oil seal is now seeping oil
which means stripping it down for repairs
AGAIN! This is probably A silly question but because the seal has gone would this suggest that the crank in moving side to side? Although the rear main oil seal is fine? Thank you.
-
Brought Blitz Superspark 9mm HT leads off socks. I asked a few questions about them and he happily replied with good, honest answers without hesitation. I recieved them in very good time. And also the postman had a good laugh lol
Thank you matey.
-
I've done it lads
it's chattering! Thank you so much for your help!!
Knocking noise
in Chassis & Suspension
Posted
I should mention it does sound asif it's coming from the struts. I will check th engine mounts thanks for your input Liam