-
Content Count
1696 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by Sefton-EP91
-
-
I blocked off the BOV pipe off the intercoller and blocked the vacuum pipe but don't get any chatter at all, someone please advise..
-
Is this bad for the turbo? i was thinking of doing this myself but wasnt sure if it would do any harm...
-
Thanks mate
-
Can the original ECU be mapped, tweaked about with in anyway? I am under the impression it can be, only to a certain level, is this right? I'm not planning to mess around with it but just wanted to know just out of sheer interest? Thank you guys
-
Thought I would add a pic, I haven't added one yet. Feel free to leave comments and any suggestions.
-
Mine does it when cold. Are the pumps the same as the n/a pumps? It sounds like its coming from that area. I just hope I don't replace it and it ends up being the alternator pulley.. Are they very common on glanzas, the alternator pulley? Thank you.
-
I know this is an old thread but this noise seems to be coming from my PAS Pump I'm not convinced that its coming from the bottom pulley but I'm very grateful for your guys input. Has anyone experienced anything like this? It's getting very frustrating. Are the pumps on the n/a the same as glanza? Thank you guys.
-
I had someone start my car for me today to see if I could pinpoint where this noise is coming from and seems to be coming from the PAS pump, area. It sounds asif its coming from the pulley. Has anyone had this problem? Can anyone point me in the direction as to where I can get another PAS pump from? Are they the same as the n/a's?
-
im after a braided oil feed/return line. pm or reply here if anyone has one
thank you
-
What do you guys make of japspeed, was thinking of a new mani from them? Any one brought one from them or experienced any problems with them? Thank you.
-
Thank you for the info guys it is much appreciated thought maybe the sticker was trying to tell me that I had a hidden gem lol (that I never knew about) lol again thank you guys
-
It's probably been covered already but what does it look like from the outside, I found a sticker on the inner door slam of my car and it says LSD on it it's all in Japanese so I can't understand it but before it says LSD it's got my engine number etc etc in seperate sections. Any ideas? It's on drivers side door slam..
-
Yeh this sounds like my problem ill check the ring gear on fly wheel with starter removed thank you mate
-
When you say starter sticking in do you mean it's not fully come out of the housing?
-
Old post but thought I would add, I have just recently started to get a noise (crunching/grinding) on start up, it only when I turn the key for engine start whilst engine is turning over, have a feeling it could be starter motor but you guys have any ideas or had something familiar? Thanks
Thought I would add the starter has never failed to turn on the car..
-
I'll be there.. Count me in!
Rob
ro55ifumi
Hair
Tara
james@cjperformance
Steve GT
Starbuck
TrisK
Akyakapotter + Tara
Jakeep82
Sefton-EP91 + girlfriend
-
Thanks for the headlights matey received very fast as promised
-
how much would the decat and manifold be inc postage if i was to buy together?
-
I'll be up for this defo with the girlfriend, give me a chance to meet some of you guys
-
No problem mate
-
Sorry for mentioning this guys but I'm sure you want the site to be perfect but where it says:
We dont provide anything psyical but for those who use the community alot, we remove alot of the restrictions and set parameters that standard members have.
This is where you would purchase the membership in the store. The word physical, Under the question:
What you get if you purchase?
Hope this helps.
-
I'll check tomorrow and then I'll let you know what I find. Thank you for the info though.
Mine does this too, changed the alternator belt and its better but still does it a little when its been sat for a while in damp weather
Might have to change this as well. If it goes then thumbs up if not then Ill have to keep looking gna check the bottom pulley as well like dangeestarlet said.
-
I'll check that out tomorrow, if your right.. Does this mean a new pulley?
-
I've seen it a few times in boongate McDonald's. it's an r reg ends in Xbt.
BOV to Flutter
in Intake, Turbo & Exhaust
Posted
I am still on a ct9 setup although i do have a relocated air filter, if i just block off the vacuum hose will it still flutter. rather than block them both? it made a DV kind of noise, even though there wasnt a DV installed. i love the sound of chatter so hopefully can get mine doing it. lol i do have a HKS SSQV but mine doesnt have a bolt for adjustment :S it was installed when i brought the car.