thunderpants

starlet nath is selling an entire 98 glanza loom. pm him and hell sort you out. gary

check here dude http://www.ukstarletclub.com/forums/index....showtopic=29026 hope it helps gary

i have mine mounted in the middle right air vent. easily accesible and luks great. standard boost of a starlet is low 0.4 bar and high boost 0.6 bar. as long as you dont go above 0.8 bar you wont hit fuel cut.

haha thats hilarious!

block it off buddy. when you get the hks actuator it only has a single port anyway so when you fit it it will do away with this pipe anyway so its ok.

haha no worries my friend you can touch the fuel rail and x bar if you so wish my friend. ive told you already more than welcome to come visit although atm the exterior is major dirtayyy so it wudnt be good to see it in such a state lol. gary

i find i go for ages without an update then when i do update its got to the stage where more than one thing has arrived to fit then update with. on that note tuesday should be a good night as the trust oil cooler and relocation kit arrives to add aother touch in the engine bay. power fc is being fitted week after next,were gunna see just what a standard ct9 can handle as to how the car works without a pcv valve, i was always led to believe it only provided a steady idle? well mine got water into it and stopped working so i unplugged it and got it set up to have a steady idle without it, nee

well thats a differant story altogether lol. it does work well just the idle goes a bit funny sometimes but for the most part its fine. its hard to explain but it works so i ask no questions lol. gary

i think you can just see the two threaded mounting points for the fittings i have just fitted this evening to run the lines to the oil catch can. just waiting on the fittings coming to fit the fpr in the final position. then im gunna fit the carbing oil catch can where the fpr is atm. as to why im running no bov sounds mental and i find it much more responsive. so far ive been running this turbo for two years with no problems so its all good gary

well was quite busy over the weekend and fitted the following wee bits, below is a before and after picture, can anybody spot the difference? before.... after......

go to toyota and say i need a full engine gasket set they have it on their epc i think last time i checked it worked out at 150 ish iirc but i could be wrong about the price

welcome buddy what plans you got for the starlet?

what a terrible terrible driver. as soon as it starts to go round apply opposite lock and modulate throttle with the right foot but yet he doesnt. i found the best way to learn how these cars handle was to drive an sr starlet, you learnt the way this car handled with less power, now the car has more power yet handles the same so you can apply what you learnt easily.

you really cant go wrong it just goes back on in the same position just be careful not to nip the o ring on the bit you insert into the intake manifold. i got a wee bit of wd40 just to lubricate the o ring when it was going back in. to get it off undo the 2 10mm bolts, take off the wee electrical connector andtake off the wee tube on the bottom of it and lift it out but youll see it when your doing it it is easy enough.

yup i forgot about that passenger no seat belt warning thingy to the left of the hazard lights where the nirmal blanking thing is

how the fook have i not seen this thread before. i feel ive been missing this in my life lolz. sparky cars coming along nicely dude. i think the green theme will look mental, but a good mental. gary

i have a 1999 same as a 1998 in the interior and the differences between the 96-97 and 98-99 models are that they have: differant style steering wheel differant shape seat with differant fabric covering door cards have the same style fabric as the seats hi/low boost button is in a differant location passenger airbag amber illumination of the clocks etc any more please feel free to add as these are the only ones i can think of right now as regards to the interior

sounds like the idle control valve alright. stand in front of the car and look at the engine. on the left hand side of the intake manifold you will see a wee grey thing connected to the side of it with two 10mm bolts. this is your idle control valve. it can mess about if dirt or water gets into it. you can buy a new one from toyota or get a second hand one off someone but a 2nd hand one might have the same problem. another thing yah can do is check for air leaks from your boost piping as my idle messed about crazy bad and idled at 3000 until i found my air pipe had blew off the actuator.

haha that reminds me of the time i thought it would be funny play a joke on a set of jevhova witness's with a double barrell shotgun haha. they asked me if i had god in my life, i told them two seconds i had something in the oven ran got the shotgun (which wasnt loaded) came back to the door and said no, but i can make you guys an appointment hahahha never seen two guys run so fast in my life. had to run after them to tell them i was joking though. funny nobody else came back to the door

apexi power fc has arrived yey. gunna get it mapped now within the next couple of weeks advan rgs are off and going to get refurbed now next week ready for spring time. ordered new back discs and pads for the rear as they were well fooked and ferodo ds2500 pads for the 4 pots. looking forward to having the brakes back to full effectiveness. thanks for the good comments guys gunna be going to a few track days this year to see how it gets on hehe

no worries dude catch yah some time. power fc has arrived so now im gunna probe the limit of the standard ct9 ;)

thank you guys. makes it worth while to see my efforts recognised by people. although i think someday when im finished it will be awesome. yes idrees thank you very much advan rgs were the only wheels for me ever since i seen them on jam glanza in hyper rev many moons ago and the zep seat rails fitted awesome, just needed very slight adjustment but as i say great purchase. power fc, blitz oil cooler kit and defi cr advance gauges (boost,egt in a pillar pod and then oil pressure oil temp and water temp in the middle console thing i made. shud luk pretty mental at night. also a couple of other s

then i think its time to lock the car in garage and only slowly reveal the complete sexiness of the bar a bar at a time hehe. then it wont cmpletley overload the senses. the welding is meticulous and the fit is second to none and the strut brackets would be well at home on an earthmover lol they will never ever ever fail. completley worth the money, bit expensive though worth it most definateley in the end.

and without further waiting i give you...... phil your welcome to come visit dude. but if you sex my bar ill be very disappointed lol gary

miracle x bar will be here tuesday. will deffo have pictures once fitted very excited