maddox710

I remember when people used to just give these away 

So what was the knocking noise then nick? 

1 hour ago, akyakapotter said:

I have quite a bit of play in my rack but it's all good. Had it a year already that time has flown by. 

 

I know nick its flew by, move into house next week so too busy for anything. I've checked my rack and think it's abit of both play in the rack itself and the rack bushes giving in. 

First year of ownership on this one has pasted and second service was performed. Still not put my bucket seat in can't find a driver rail for it. Also I've noticed my steering rack might be dying, but il cross that bridge later. 

Same here 

23 hours ago, Jesus diaz said:

Oem 4efte its same, 182hp@10 psi with oem ecu maybe it can get 220-250 tuned at 0.9 bar.

 Don't suppose you compared the pistons side by side? 

1 hour ago, K24_glanza said:

So I have found a live from the alternator that is only live when the engine is running. I started  trying to use a saxo pump but have now got a mercedes A190 pump. It takes up less space and is easier to mount. The speed input makes so much sense now. The pump has its own relay with two thin wires one moves the relay and the other was a mystery until now. Thanks mate. Just Need to find a speed output now.

Maybe pull something off the back of the speedo? 

Some really nice numbers mate well done 

6 hours ago, Jesus diaz said:

Im using 2nz piston on my 4efte, compression 170 psi with metal hg, have over 20mil km running with out not problems, i put it on a dyno 182hp @ 10psi at the wheels

My ig @jesradiaz

What rod/gudgeon pin setup? 

Yeah cheers mate I did see yours but like you say I just want to pay cheap for a stock rail

Bumb

Maybe a high res pic of the stamp on rear box will help 

2 hours ago, Dean_mc88 said:

No not toms c3r these.

 

http://www.superstreetonline.com/features/1308-10-hottest-wheels-of-nisei/

 

second set of alloys in 

Someone had/has a set on a ep82. Look like et35-40+ fitment won't be too much of an issue on starlet I would of thought, first place wheels usually catch is inner frame rail and outer top arch lining 

2 hours ago, morgey said:

The knocking on the BC will likely be the nut on top of the pillow ball, mine and a couple of others have came loose before and caused a knocking.

2 hours ago, morgey said:

The knocking on the BC will likely be the nut on top of the pillow ball, mine and a couple of others have came loose before and caused a knocking.

On 6/23/2018, 10:55:26, daniel_g said:

Ahh cheers mate I'm off work today so might have a quick look too see what's what 

Looks amazing 

53 minutes ago, daniel_g said:

Depends what you are used to driving on, i have them on mine aswell, quite stiff sidewalls.

Normally ball joints, track rods and lower arm bushes cause the most issues up front on a starlet.

Aldo worth noting if the rear beam isnt solid, ie panhard and beam bushes worn, that gives a weird loose rear floaty feel.

7mnth old bc coilovers, new ball joints, track rod ends, and new adjustable panhard rod 

Also would like to add the car is on nankang ns2r semi's 

6 minutes ago, daniel_g said:

Havent heard any feedback about the black series steering rack bushes, 50 quid for the pair.

One of the best handling mods i have done was fit a 4 point under brace, ultra racing.

yeah ive always wanted one dan the starlets dont have sub frame for any structural support 

my old (famous) white v had full poly and wasn't that bad, id like to get rack done first, not really a hard job from what I've looked at, anyone done similar job ?

lately ive had an issue with my glanza and the way it feels driving down the road, the steering feel is very vague and wonders around the lane on spirited driving its making the car un-enjoyable.

im pretty positive my drivers side front bc coilover(7month old) is knocking slightly, and I've had the car up on a ramp and noticed wet steering arm gaitors so pretty sure the rack is on its way out, this coupled with an average alignment and stock glanza seats isnt helping.

anyone got any thought on this?

9 hours ago, parker85 said:

I'm in northern Ireland mate that be grand aye want me to send u pics tomorrow u only really need the feet of it then 

Yes please buddy 

5 hours ago, parker85 said:

Think I may have one mate 

£20 Inc postage I'm only going to chop it up with a grinder. Where bouts are you might be able to collect 

31 minutes ago, parker85 said:

Think I may have one mate 

Okay mate just let me know how much posted 

bump

1 hour ago, Jay85 said:

Think there’s a lass on one of the fb groups selling a rail! 

Mill see if I can grab a link

Tbh mate just after stock ones to cut up