G14 NZA

not a 100% as it's listed as "pattern select" but i think it's 84720-10060 if that helps?

Hi sam, whats your paypal address mate. Waitings no problem. Mark

Hi mate, is this the optional 3 point rear strut brace, if so i'd like one. How do I order from you? Cheers Mark

I know the C's requires the standard shifter to be dismantled but I get the impression the TRD is a complete bolt in unit, am i right?. Cheers Mark

I used a momo boss in my mr2 for sparco wheel, should be fine

I've got a momo boss kit if ya want one. Mark

23300 19495 is listed on the EPC as being for a UK 4efe EP91. Although a 19395 is listed as fitting all JAP 4E engines so should fit your car as well. HTH Mark

Couldn't tell how useful they are as i havn't had much luck finding one that fits my car but i've got a brand new one going very cheap if you want one.

Having found out the hard way the Whiteline ones don't fit without modding i've a GReddy one instead and it looks like this f**ker won't fit either ;) yet several Glanza owners have them. How!!!!!? Please help Mark

How to fix my strut brace and fit my panhard rod all in one, Ta very much

Hey guys, my rear strut brace arrived today and i'm pretty sure it's the wrong one but the part number on the box is definately right. The ends of the brace only have 2 holes in them but the strut towers have 4 bolts, 2 for the top mounts and 2 that are part of the bodywork. Am I missing something or does it need to go back?. Cheers Mark

The part number is 90105-10113 and it's roughly £1.30ish. HTH Mark

If you have a glanza it's 90467 - 07071 - B3 Mark

Cheers mate, Don't suppose you know which pin number i need on the 12 pin ecu plug?

Hey all, got myself a secondhand Power Meter id3 with no instructions. I've managed to find enough info to know the speed wire goes to the 12 pin connector on the ECU. Does anyone know the colour rather than a pin number for the speed wire? Cheers Mark

The Starlet is listed as Part Number T020 ep70 ep80 ep90 £616 Mark

Thanks for the replies peeps but i really need an exact answer so i can order the right size samcos and their too expensive to be ordering the wrong ones. I would measure my own inlet if some goon hadn't left the tabs of the scissor clip on the EFI pipe inaccessible to nearly every tool know to man. Mark

Please please please can anyone confirm the CT9 external inlet size. Searching on here and TGTT i've so far found suggestions of 38, 45, 51 and 60mm. Thanks Mark

I suppose Konig seats are ok but i'm really hoping other seats fit their frames as well.

After much internet searching for aftermarket seat frames i found some by konig but i don't like their seats much, anyone know if other makes of seat fit them? cheers Mark

According to the Toyota EPC theres only one type of dissy cap and leads for a UK EP91. Send em back and get Magnecors their the nuts

Hey all, been thinking about making a custom intake using samco's and alloy pipe but I can't find anything on the size of the turbo inlet on a Glanza. Any info would be great as the plastic toyota pipe on the car has a HUGE scissor clip on it that i so far can't get off to measure it myself. Also do glanza's really need dustbin lid cone filters like most aftermarket kits have? I'd like to use a normal sized green cotton one. Cheers Mark

Thanks for the reply and the welcome keirz. Anyone know if theres glanza crystal lights? Mark

Hi all, just got my hands on a cheap Glanza V, bit of a shed at the moment but i love it! . The first thing id like to do is fit the crystal lights from page 2 of the part numbers section but will they fit a glanza? cheers Mark