dangeestarlet

Pmd Ok buddy let me know

Bump

looks like this is your glowlight

That's not a converter

You may aswell you can't insure it and may aswell boost it

Would a gt one fit?

Complete intercooler kit and catch can available for extra £100 and gt brakes inc disks calipers and carriers for £40

I put the engine up for sale £525 delivered but had no interest, and no point selling other bits till the engine is sold , if it don't sell in a week il just hold onto it. Thanks for the advice tho

You don't have a converter then

I know I just want to get some of my money back and buy a nice gt or glanza , and I put it all in a 5 door to make it a sleeper and it's not for me I wish I put it all in a sr or a 3 door.

Both the same mate

Item For Sale:complete package to convert your n/a to a fte Item Condition & Description:can be shown running with video as it's still all in car ATM , Comes with 4efte engine complete with all auxiliaries. , turbo , gearbox etc, with new clutch and has been serviced ,full glanza wiring loom , glanza ecu, glanza wiper stalks,glanza clocks, ignitor and coil pack, map sensor. , and fuel pump , everything you need for a conversion including driveshafts. , all you need is a intercooler and pipe work , compression tests and inspections welcome and pick up welcome Price:£675 delivered

Yes fill the radiator cap with coolant and water , start the car for till the fan kicks in with rad cap off then turn it off and leave it to cool and then top up if necessary

Swap you my engine for it? lol

Definitely no gasket , the thermostat comes with a rubber ring, just take the hose off and all the water will come out and if I was you when the thermostat is out put a hose pipe in the radiator and flush it all out and then put all back together and re fill with fresh coolant /)

Hahahaha! Weyro is the one that ripped someone off on her by saying he had a plug and play and would swap it for a emanage and ripped the bloke off by not sending it

You don't need a gasket, the thermostat rubber seals it, don't take the whole housing off just the bit were the bottom rad hose goes to You don't need a gasket, the thermostat rubber seals it, don't take the whole housing off just the bit were the bottom rad hose goes to

Take bottom hose off the side of thermostat (just below distributor) and then unplug one sensor so you don't damage it then undo 2 10mm bolts (found it easier with a little spanner ) then pull the case off them swap thermostats over and put all back together. , take note of which was thermostat was but if you got instructions with thermostat it will tell you which way to put it in, it's simple should take ten mins beat me to it haha

My garage haha , nice and cold and mainly wet do have a proper garage but there is trees grown in front of the roller shitter doors and council won't let them to be taken down , as you can see it in the background lol

I got one aswell you can have for free I got a few of them

Tell your freind to sell me that manifold lol

Ttt

Il take it what's your PayPal?

Civic rad maybe ?