Jump to content

dangeestarlet

Member
 View Profile  See their activity

  • Content Count

    2791

  • Joined

  • Last visited

 Content Type 

Everything posted by dangeestarlet

  1. dangeestarlet
    You can't but them
  2. dangeestarlet
    They don't come with strips for them mate
  3. dangeestarlet
    As above need one for decat to middle pipe with 3 holes and the other 2 gaskets to join up the 2 other pipe and back box the one with the 2 holes, cheers
  4. dangeestarlet
    Looks awesome
  5. dangeestarlet
    Parcel to go about £10 to send them sent some recently
  6. dangeestarlet
    You need a dill glanza loom, engine loom , dash loom and also rear loom , the wiring in the headlining you can keep as it plugs into the glanza loom
  7. dangeestarlet
    As above just stopped working, also heaters won't work now , helllpppp lol
  8. dangeestarlet
    Yes you can
  9. dangeestarlet
    Has the manifold got any cracks? Cheers
  10. dangeestarlet
    The spade connector is the temp for the in car temp gauge, you should have one on your loom and on the housing
  11. dangeestarlet
    your selling it? If so how much
  12. dangeestarlet
    http://bit.ly/1cweYjY
  13. dangeestarlet
    As above thinking off buying one, what are they like? Will it be easy to fit to a fte? And many people map them ? Thanks http://bit.ly/1isg717
  14. dangeestarlet
    The 2 sensors are diffrent so just get the sensors , there's plenty of n/a breaking on here
  15. dangeestarlet
    Il keep trying to bleed it , the 2 Heater matrix pipes are hot
  16. dangeestarlet
    I had the same issue , I used the sensors from my n/a engine
  17. dangeestarlet
    Did this car used to be silver? And a quadlight?
  18. dangeestarlet
    Just won't work and to top it off my heaters won't switch on! That's all there is with this car is problems grrrr
  19. dangeestarlet
    Yep they all seem warm aswell , doing my head in now I've had enough lol
  20. dangeestarlet
    Done that it keeps spilling out of radiator
  21. dangeestarlet
    Read a few guides of leaving the cap off but it doesn't seem to want to bleed , put a new thermostat in it today and it still won't do it, it's not smoking like if the head gasket is gone or nothing , thanks in advance
  22. dangeestarlet
    More goodies arrived, thermostat, new plugs and short route got pipe
  23. dangeestarlet
    No you will have your hand sucked in the turbo , take the intercooler pipe off the inlet and out your hand over the inlet and don't rev it lol
  24. dangeestarlet
    Welcome. get some pictures up of the beast !
  25. dangeestarlet
    Might paint it tommorow when my new short route hotpipe arrives ,need some proper toyota wheel trims now and it needs a major valet
×
×
  • Create New...