Spoon_tuned

Had a few niggles lately which are annoying me so i wanted to tackle them this weekend but as what normally happens things aren't easily resolved so……I had a whining noise coming from what seemed to be the front of the car and when i checked i noticed there was no gasket from the hot pipe to the turbo and bolts were loose so i bought some gasket paper and made a gasket then upon inspection i noticed that there was so many nuts missing and nuts not tight like 2 bolts missing from the cat to turbo and 2 were finger tight then i looked and noticed the actuator was half hanging off the bolts were so loose then i had a final look and found out the turbo to manifold nut was missing arrrrgggggghhhh and there is no cir clip on the actuator where it attaches to the turbo so i have to find one of them as well it's been a nightmare.. So basically i tightened everything back up put some new nuts on new gasket put everything back together and the car idle is still all over the place and i'm getting a whining noise from the rear of the car on boost but i have a feeling it's a wheel bearing or it's the rear calliper as it's sticking a lot.. Last week i purchased some GT seats and when i removed the bucket seats i snapped the head off one bolt so i had a job getting the thread out and i had no drill. So i gave my grand pop a ring and he lent me one it's like the oldest drill i've ever seen ahaahahah but it did the job tried an easy out on the thread no luck though so ended up drilling as much out as poss and fitted a new bolt in took a while but it's sorted now.. been a mad weekend hoping for a better result but i have a few other things to do to sort the car it's just annoying me atm

i'm going OLU DENIZ which is in turkey this will be the 3rd time were going it's so beautiful there and so much to do there as well paragliding quad biking boat trips and you can visit a lot of local places like butterfly valley the blue lagoon private beaches and the scenery from babadag mountain is just stunning

Well were ever i need some

Hi guys anyone know the rough size of gt/glanza vacuum pipes wana buy some silicone ones off ebay...

Gaskets??? From exhaust and turbo??

Ht leads?? Air filter?? Plugs??

Anybody know the rough size of the most the vacuum lines on a gt or glanza??

Nice mate looks very clean aswell

Yeh man really annoying gunna have to take everything off i rekon

Ive checked all pipes they all look good mate...

if that helps do i need to replace the tb??

Will do jim

Thanks adam i will check that aswell Yeh will do mate driving me mad

Dont you need a volt meter for that???

Anybody had any issues with the ignition timing on there gt or glanza??? I think mines off as its idling high jerky when backing off the gas it jerks and it idles high when at junctions etc Ive bled the radiator and checked all vacuum hoses and replaced gaskets

Youve got the camera setting wrong mate its over exposing the image what camera are you using??

Noooooo six by nines in the parcel shelf!!!

Bump.... I'll sell seperate if i get 2 buyers

Bump

Just any ports?? Its just being able to park the cars there thats all

It's pretty simple dan we will sort it the weekend just gta add another wire. Make sure u buy some spade connectors and some of the ring eye spade connectors to as we will need them to earth the wheel

Yeh peak district would be good if theres somewhere to park up

Weather ent looking good for the weekend again

yeh ok

ok mate