Si@Fiske Posted March 28, 2017 Author Share Posted March 28, 2017 Hi Dean, Pleased to hear! They are all moulded and in production - we need to get a perfect one out and throughly check it over for quality then they will be go into full swing production. Either way.. it wont be long all being well!! Cheers Simon Quote Link to post Share on other sites
Si@Fiske Posted March 28, 2017 Author Share Posted March 28, 2017 Afternoon Gents; Quick update on the moulding - here's a quick image to show you (granted it is of the Livesports desgin). Wont be too long now Exciting times! Simon Quote Link to post Share on other sites
Craigglanzav Posted April 18, 2017 Share Posted April 18, 2017 Any more updates on them Quote Link to post Share on other sites
Si@Fiske Posted April 18, 2017 Author Share Posted April 18, 2017 Hi Craig Yes they are currently in production and we have made some tweeks to the mould after pulling the test panels out. As put originally we are all about quality not mass produced cheap parts - as a result it takes time to get it perfect! As soon as I have some images of the final finished fenders I will post them up! Regards Simon Quote Link to post Share on other sites
Craigglanzav Posted April 20, 2017 Share Posted April 20, 2017 No worrys it's best to take time than have a shot fitment Quote Link to post Share on other sites
Si@Fiske Posted May 9, 2017 Author Share Posted May 9, 2017 Morning All, Just had an update with manufacturing all great news, all the fenders are moulded and had an initial quick trim. The final stages are now polishing, trimming and pre drilling. A relatively simple process left but it just takes a little time as I have ordered over 40 sets of fenders!! They will all being shipped in a job lot so all designs EP82 / EP91 will be coming at once - I should have an anticipated shipping date later today all being well! In the interim, here are some photo's to wet your appetite..... Quote Link to post Share on other sites
jimmymac101 Posted May 9, 2017 Share Posted May 9, 2017 Ohh my 😍😍😍 Quote Link to post Share on other sites
jayc-glanza17 Posted May 9, 2017 Share Posted May 9, 2017 Mint.. Quote Link to post Share on other sites
Craigglanzav Posted May 9, 2017 Share Posted May 9, 2017 Can't wait Quote Link to post Share on other sites
Calum122 Posted May 9, 2017 Share Posted May 9, 2017 Wow! They really do look gorgeous! Quote Link to post Share on other sites
Nosixpack40 Posted May 10, 2017 Share Posted May 10, 2017 ep91 porn Quote Link to post Share on other sites
Si@Fiske Posted May 10, 2017 Author Share Posted May 10, 2017 Thanks for all the kind words everyone! We are really excited to get these out to everyone!! RegardsSimon Quote Link to post Share on other sites
Si@Fiske Posted August 2, 2017 Author Share Posted August 2, 2017 Update: Afternoon All, Great news that the fenders are finally packed up, wooden crated and sent to port ready to board the ship to the UK. Shipping time will take 30-40days all being well and then I will arrange getting this huge crate from port in the UK. As for everyone who has paid a 50% deposit, as these have now been shipped and paid for the remaining 50% is now due. I will contact you all individually by PM / facebook etc and then resend the paypal invoice for the remaining balance. Any queries questions, please let me know! Thanks again, Simon! P.S Carbon Boot, Plate surround, JAM Spoiler, JAM Skirts all going into mould! Keep your eyes peeled for the threads! Quote Link to post Share on other sites
Craigglanzav Posted September 30, 2017 Share Posted September 30, 2017 Any up date on them Quote Link to post Share on other sites
Ep Starlet Alan Posted September 30, 2017 Share Posted September 30, 2017 Also waiting on a update Quote Link to post Share on other sites
RobSR Posted October 3, 2017 Share Posted October 3, 2017 Hi all,Great news - the shipment of wings arrived from port yesterday with us so we've been going through test fitting and quality checking so far. All is looking very promising and the quality is fantastic.Si will be in touch with you all in regards to shipping / collection 😊 Quote Link to post Share on other sites
Si@Fiske Posted October 6, 2017 Author Share Posted October 6, 2017 Evening All, As above, we have taken stock of the fenders and have been trial fitting and assessing the quality - we have been very pleased meaning you all will be also as we are rather fussy!! Here some sample images and I will be getting in touch with everyone to sort posting or collection - down to each individual's choice! Quote Link to post Share on other sites
ro55ifumi Posted October 8, 2017 Share Posted October 8, 2017 (edited) How many sets available?? Also shared on fb an Instagram ;) John Edited October 8, 2017 by ro55ifumi Quote Link to post Share on other sites
Calum122 Posted October 8, 2017 Share Posted October 8, 2017 What a piece of art work! Quote Link to post Share on other sites
jayc-glanza17 Posted October 8, 2017 Share Posted October 8, 2017 I have mine posted please si as said on deans instagram. Thanks you buddy. Quote Link to post Share on other sites
Si@Fiske Posted October 9, 2017 Author Share Posted October 9, 2017 I shall be confirming how many sets are still available shortly, I shall also be doing a new run for everyone who has missed out! @jayc-glanza17 I will be going through all orders and contacting everyone in due course to collect remaining amounts and provide shipping quotes to those who need it! Thanks everyone Simon Quote Link to post Share on other sites
jayc-glanza17 Posted October 10, 2017 Share Posted October 10, 2017 No problem matey Quote Link to post Share on other sites
Starlet Rep Build Posted October 28, 2017 Share Posted October 28, 2017 @Si@Fiske Any update to if there was any sets left? and i noticed you will be making a few more carbon parts too..any update on these? Thanks a lot Andy Quote Link to post Share on other sites
RobSR Posted October 29, 2017 Share Posted October 29, 2017 13 hours ago, Starlet Rep Build said: @Si@Fiske Any update to if there was any sets left? and i noticed you will be making a few more carbon parts too..any update on these? Thanks a lot Andy Hi Andy, At this moment in time we are currently out of stock on our first batch - the demand has been huge! Would you like to pre-order another set ? We have more parts moulding currently including a boot, Jam spoiler, number plate surround and Jam skirts. Many thanks, Rob Quote Link to post Share on other sites
RichWillmore Posted June 27, 2018 Share Posted June 27, 2018 Rob/Simon, Got any carbon stuff made up ? Thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.