Extended wheel studs

[HedgeyGedgey]

Anyone have an idea where I can get some extended studs for my glanza? 

[akyakapotter]

Maybe these ? 

https://www.fensport.co.uk/products/longer-wheel-stud-65mm-toyota-thread-m12x1-5

[HedgeyGedgey]

6 minutes ago, akyakapotter said:

Maybe these ? 

https://www.fensport.co.uk/products/longer-wheel-stud-65mm-toyota-thread-m12x1-5

Legend, I should think they'll fit as it just lists toyota

need like a 7mm spacer as it's barely scraping with the 5mm spacer on the grid drifts. Very frustrating lol

[akyakapotter]

Good old ksports huge brakes mines sooo close even with 20mm spacers 

[HedgeyGedgey]

I didnt realise they were this big lol and everyone said grids wont clear them. Bloody huge things, do you know your wheel specs?

[akyakapotter]

needed 20mm spacers and they just clear and I mean just they are 15 X 6.5 couldn't tell you et as I have no idea. 

 

[HedgeyGedgey]

I got told an et28 is needed to clear k sports, so yours must be around et48 without the spacers. I'm right on the edge of the std arches with a 10mm spacer and I've no idea what specs mine are either lol

[wickedep]

12 hours ago, HedgeyGedgey said:

Anyone have an idea where I can get some extended studs for my glanza? 

check ARP. they have longer studs.

[HedgeyGedgey]

9 hours ago, wickedep said:

check ARP. they have longer studs.

I cant seem to find the correct spline measurement? Is it 14.3mm do you know?

[mycars12]

I have a tercel so im not exactly sure if the hubs are 100% the same but share similar parts. I am using ARP 100-7717 which is evo studs. They are really long tho. Works well as long as you get the studs in straight. I can post pics if you want. 

Edited November 10, 2019 by mycars12

[HedgeyGedgey]

2 hours ago, mycars12 said:

I have a tercel so im not exactly sure if the hubs are 100% the same but share similar parts. I am using ARP 100-7717 which is evo studs. They are really long tho. Works well as long as you get the studs in straight. I can post pics if you want. 

Thanks for the help, I've ordered the ones Nick posted from Fensport. If they dont fit I'll give evo ARP ones a try. Thanks mate

[Calum122]

I usee the fensport ones dor my wms brakes no issies

[HedgeyGedgey]

4 minutes ago, Calum122 said:

I usee the fensport ones dor my wms brakes no issies

Thanks for confirming they fit mate 👍

[HedgeyGedgey]

Well the fensport ones dont fit, the spline count is completely different and wont grip at all. So I'm still looking for anyone that has any info on extended studs pleeease 

[Calum122]

I can confirm, the Fensport ones I have on my Starlet. I guess I probably knackered the hubs putting them on. But they are solid. I will go to the garage later today put up a photo.

 

I will see if I have the stock ones lying around. Give me a few hours.

[HedgeyGedgey]

Yeh it does seem odd that your ones fit and these dont. I did lose my temper and tried to send it home and it made no difference haha 

[Calum122]

Nah mine are the same.

 

I tapped them in. The used the wheel nut and pulled the studs through. Never had an issue.

[mycars12]

The evo arp ones that I had installed had a different spline count as well and they went in fine with some patience. Knurl diameter was almost spot on though. If the hubs get messed up you can always get a set off ebay.

[Calum122]

@HedgeyGedgey What did you do in the end mate. The ones you got are exactly the same as mine and I've had no issues.

[HedgeyGedgey]

On 12/7/2019 at 2:20 PM, Calum122 said:

@HedgeyGedgey What did you do in the end mate. The ones you got are exactly the same as mine and I've had no issues.

Gave up haha. Left the car in the naughty corner till spring now. I think I'm gonna try and tap them in, and then pull them through with some steel nuts I have. And then pray haha