Charlie Thompson Posted April 21, 2020 Share Posted April 21, 2020 Currently looking at getting a front mount intercooler for the next modification to my glanza and I have a few questions. 1) do I need any other upgrades to be able to run one (currently got 3" exhaust, induction kit and dump valve) 2) will it need remaping once I've fitted a fmic. 3) any suggestions on what kit to buy. Thanks Quote Link to post Share on other sites
SKINY Posted April 21, 2020 Share Posted April 21, 2020 J-Performance or HDI do starlet kits, I have the J-Performance core its a beast no other mods or mapping required bud Quote Link to post Share on other sites
Charlie Thompson Posted April 21, 2020 Author Share Posted April 21, 2020 9 minutes ago, SKINY said: J-Performance or HDI do starlet kits, I have the J-Performance core its a beast no other mods or mapping required bud Thanks dude 😎 the j performance was the one I was looking at from TD. Wasnt sure whether I would need a half rad or not as it look a little tight for the pipes to run through Quote Link to post Share on other sites
SKINY Posted April 21, 2020 Share Posted April 21, 2020 My setup is, J-Performance core into the HDI pipe from the turbo. The intake side is a proper starlet pipe bent at both ends with a dump valve on it, that's probably about 18 inch then a 90 into the core pics on toyotagtoyotagtturbo.com I abandoned my thread on here because the place is pants Quote Link to post Share on other sites
Sam44 Posted April 21, 2020 Share Posted April 21, 2020 (edited) 1 hour ago, SKINY said: My setup is, J-Performance core into the HDI pipe from the turbo. The intake side is a proper starlet pipe bent at both ends with a dump valve on it, that's probably about 18 inch then a 90 into the core pics on toyotagtoyotagtturbo.com I abandoned my thread on here because the place is pants Looking now. Always good to expand the know how. Yeh I'm running 2x90deg bends into to core so definitely needs improving. Thanks for the information. Edited April 21, 2020 by Sam44 Quote Link to post Share on other sites
SKINY Posted April 21, 2020 Share Posted April 21, 2020 Rubber 90 from core into a small length off straight then the 90 up to join the other pipe from memory, havn't seen my GT from September lol Quote Link to post Share on other sites
Sam44 Posted April 22, 2020 Share Posted April 22, 2020 Ill come on the other site now and have a look. Quote Link to post Share on other sites
stevie82 Posted May 24, 2020 Share Posted May 24, 2020 Td don’t stock jperformance cooler kits anymore 🙁 don’t order direct from jperformance u won’t receive it and have to fight to get your money back sadly Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.