micky boy Posted March 29, 2010 Share Posted March 29, 2010 Nice one mate thats a good result considering you have 17inch wheels and had lots of wheel spin.....Keep it up buddy. Quote Link to post Share on other sites
Qglanz Posted March 29, 2010 Author Share Posted March 29, 2010 tnx mate on 15's i run 15.4 on the strip but that going to be my standart point for me too tune on Quote Link to post Share on other sites
Qglanz Posted April 24, 2010 Author Share Posted April 24, 2010 can someone please help i change my clutch and pressure plate a time ago and didn't change the release bearing and then the release bearing started to make noise i knew it was it cuz when i press the clutch it made noise and when i release it stop or the other way around but today the sound became worst and my pedal got pretty hard and the car engaged pretty harsh can someone please tell me what it could be ? Quote Link to post Share on other sites
Sparky Posted April 24, 2010 Share Posted April 24, 2010 bleed the clutch mate, must be an airlock in the system Quote Link to post Share on other sites
Qglanz Posted April 28, 2010 Author Share Posted April 28, 2010 tnx mate but the clutch plate the center part if it was going to break so almost broke that's why the wierd noise can any one tell me the difference in performance in these 2 manifold for stock turbo Quote Link to post Share on other sites
micky boy Posted April 28, 2010 Share Posted April 28, 2010 Hello Qglanz There is no real diffrence in performence they are both the same realy.The only real diffrence is that you can use the stock intake pipe (EFI pipe) & stock TMIC with the compact manifold where as you (Cant) with the Ram style manifold. Quote Link to post Share on other sites
Qglanz Posted June 7, 2010 Author Share Posted June 7, 2010 i had to change my release bearing from that i noticed that my clutch plate did weird sounds so i took it out come to find that it was all most broken so i changed it to a act and you can see my trd pressure plate also from AE100 it use to be a set with the clutch plate but the clutch plate broke and give my gearbox some nice colorand also change my fuel filter to a OBX one and the wash down and a friend of mine Toyota Levin BZR Quote Link to post Share on other sites
Amjad Posted June 7, 2010 Share Posted June 7, 2010 Loving the Black & Orange theme! What did you use to clean up the engine bay? Quote Link to post Share on other sites
Qglanz Posted June 7, 2010 Author Share Posted June 7, 2010 Thnx mate ! to clean my engine if it's really dirty with oil and grease i use degreaser but after that just to wash it i use soapy water like in the pic above that's just soapy water and after drying every thing i spay it with WD40 and the rubber hoses with the dashboard thing (son of a gun) Quote Link to post Share on other sites
Amjad Posted June 7, 2010 Share Posted June 7, 2010 Ah thanks for the tip!What electrical stuff do you cover up before washing? Quote Link to post Share on other sites
gtmuzz Posted June 7, 2010 Share Posted June 7, 2010 Nice v mate, like how its sunny in EVERY picture aswell lol Quote Link to post Share on other sites
Qglanz Posted June 8, 2010 Author Share Posted June 8, 2010 i dont' really cover anything but i don't spray water directly at any thing either when you done dry everything with a cloth and take out you spark plugs and dry them and that's it yea i live in the caribean so it sunny the whole year around and thanks mate Quote Link to post Share on other sites
micky boy Posted June 9, 2010 Share Posted June 9, 2010 Nice update Qglanz i see you have an optional extra LSD gearbox you lucky man P.s where did you get the OBX fuel filter from? Quote Link to post Share on other sites
Qglanz Posted June 9, 2010 Author Share Posted June 9, 2010 Hahahah thanks man for that LSD i learn how to change my clutch hahahaha the fuel filter i got it from a friend he order them for civic type r and DC2 but they didnt fit or sit the same way and for us they sit the same way and bolt right on there so i took it Quote Link to post Share on other sites
Qglanz Posted June 9, 2010 Author Share Posted June 9, 2010 MayBe some one can help me do you know Nippon piston's ? do they make forged piston also for starlets (4efte)?thankss Quote Link to post Share on other sites
Qglanz Posted July 4, 2010 Author Share Posted July 4, 2010 Does any one know which fuel rail fit on our engine(4efte)?thankss Quote Link to post Share on other sites
Qglanz Posted August 9, 2010 Author Share Posted August 9, 2010 the last pic of the orange 17's sadly the had to go ! welcome the new 16's in the process of been painted Done with paint! Beeing changed ! let it say for it self ! Photoshoot i have a question my wastegate is going i have to buy a turbo so i was searching and found on ebay a guy speedvision CPS selling hybrids is it any good ? http://cgi.ebay.com/ebaymotors/CT9-Hybrid-...sQ5fAccessoriesplease let me know ! Quote Link to post Share on other sites
micky boy Posted August 9, 2010 Share Posted August 9, 2010 Looking sweet Qglanz loveing the new wheels and colour mate it get an thumbs up for me As for speedvision ct9 hybrid's they had problems with the 1st generation but seem to of sorted the problem out with the 2nd generation so i would say they are good but i think i would rether go for one of Enzo's Tongs ct9 hybrids as they have had realy good feekback....Hope that helps Tongs ct9 hybrid http://www.ukstarletclub.com/forums/index....w_item&id=1 Quote Link to post Share on other sites
Qglanz Posted August 9, 2010 Author Share Posted August 9, 2010 tnx mate for the thumbs up it was looking around and at first i was going to buy the Tongs turbo but price wise in my currency it almost twice the price of the speedvision and that my problem and with that money i could buy a whole turbo setup like TD04 or so that was my problem cuz i read a lot good thing about the Tong's hybrids so after search i found the speevision that's pay able or i have to ask Enzo what the price in dollars and see if its lower or so Quote Link to post Share on other sites
Qglanz Posted August 19, 2010 Author Share Posted August 19, 2010 just got the car lowered Quote Link to post Share on other sites
Josh@TunerLifestyle Posted August 19, 2010 Share Posted August 19, 2010 loving the bright wheels! also what front splitter is that? its one of the best looking ones I've seen! i want i want! also the black centre caps makes the wheels look alot brtter and i do like it low Quote Link to post Share on other sites
Idrees Posted August 19, 2010 Share Posted August 19, 2010 Looks very tidy mate keep up the good work. Quote Link to post Share on other sites
Qglanz Posted August 19, 2010 Author Share Posted August 19, 2010 thank you made my front splitter is a corolla splitter which i custom fit if i could i would make one for you made yes made i love it lower too sold my 17's get some 16's to go lower Quote Link to post Share on other sites
Josh@TunerLifestyle Posted August 19, 2010 Share Posted August 19, 2010 I've got 16s and personally i think thats the perfect size, everyone usualu goes for 15s , if i had 15s my exhaust would touch the floor! ahh corolla ?! was it hard to make fit? my mate owns a bodyshop so could get it done propperly,I've just payed 40 pounds for a laguna splitter lol so will use that for now really nice car mate keep up the good work Quote Link to post Share on other sites
JaymeGlanzaV Posted August 19, 2010 Share Posted August 19, 2010 love it. stunning mate Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.