james@cjperformance Posted May 6, 2011 Share Posted May 6, 2011 right i have been looking into hubcentrc spacers for a while now and im in the middle of doing some cad drawings for them and i have hit a dead end.if the spacers are 10mm will the stud not stick out of the spacer which in turn would not allow the wheel to sit flush on the spacers.For those that are using them would one off you be prepared to get me some measurements on the stud length on the spacers the outside diameter of the studs and the outside diameter of the whole spacer.any help or input would be much appreciated.thanks james Quote Link to post Share on other sites
Amjad Posted May 6, 2011 Share Posted May 6, 2011 lew777 is the only person I know who has them on here James Quote Link to post Share on other sites
james@cjperformance Posted May 6, 2011 Author Share Posted May 6, 2011 COol, you fancy some test fitting when you are back from uni.you can have the first set lol Quote Link to post Share on other sites
daz gt turbz Posted May 6, 2011 Share Posted May 6, 2011 ive got 20mm spacers on mate, but are you talking about the spacers that bolt to the hub and have studs for the wheels in the spacers? if that makes sense?these are mine mate Quote Link to post Share on other sites
Amjad Posted May 6, 2011 Share Posted May 6, 2011 Sounds good to me! Quote Link to post Share on other sites
Liam_D Posted May 7, 2011 Share Posted May 7, 2011 If you are on about producing these for sale mate i would be interested in a set. Quote Link to post Share on other sites
james@cjperformance Posted May 8, 2011 Author Share Posted May 8, 2011 @ daz the ones i will be having made will bolt on to the existing hub and then the wheel will bolt on to them.could even hve them made so a different pcd can be used.could someone shed some light on standard wheel stud length and the daimeter if you can please.@ liam what sort of size would you be looking at i have to send off some designs on monday. ;) Quote Link to post Share on other sites
ollie ryan Posted May 8, 2011 Share Posted May 8, 2011 i would be after 10mm spacers for the rear and 20mm for the front Quote Link to post Share on other sites
daz gt turbz Posted May 8, 2011 Share Posted May 8, 2011 @ daz the ones i will be having made will bolt on to the existing hub and then the wheel will bolt on to them.could even hve them made so a different pcd can be used.could someone shed some light on standard wheel stud length and the daimeter if you can please.@ liam what sort of size would you be looking at i have to send off some designs on monday. ;)Can send u a standard stud if its anygood mate Quote Link to post Share on other sites
james@cjperformance Posted May 8, 2011 Author Share Posted May 8, 2011 ^^^ pm en route dude cheers Quote Link to post Share on other sites
Liam_D Posted May 8, 2011 Share Posted May 8, 2011 Erm i would be interested in some 20mm spacers but dont know if ill be able to get away with it under the arches. 10/15/20mm something like that mate. Quote Link to post Share on other sites
whiteglanzav Posted May 8, 2011 Share Posted May 8, 2011 i definitely want some of these get them done asap lol ;)i definitely want some of these get them done asap lol ;) Quote Link to post Share on other sites
Josh@TunerLifestyle Posted May 8, 2011 Share Posted May 8, 2011 how much will thease cost? i want some for the mx5! Quote Link to post Share on other sites
james@cjperformance Posted May 8, 2011 Author Share Posted May 8, 2011 im hoping for around the 50-60 quid mark for a pair if we can get a few people in on them., so half the price of h & r ones. Quote Link to post Share on other sites
Amjad Posted May 8, 2011 Share Posted May 8, 2011 For a pair or a set? I thought a set of four was around £100? Quote Link to post Share on other sites
james@cjperformance Posted May 8, 2011 Author Share Posted May 8, 2011 pair is £100 dude here Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.