Taggy Posted April 29, 2012 Share Posted April 29, 2012 I am ditching my current toyosports manifold/decat TD04 turbo and going bigger for the forged 5e I am in the middle of doing. I cant afford to spend crazy money on something like a racetech as i have spent over £2000 on the engine build so far but want some options on what's best.What are my options?A few questionsShould i go external or inteternal wastegate?I want a screamer pipe on itShould i go TD05/VF30 or bigger? I want to make about 350hpI don't want spool up any later than 4500rpm as i need it for track use.I was looking to spend about around the £450ish mark on the system and probably about £200-£300 on the turbo.Let me know what you think is good. Quote Link to post Share on other sites
AdamB Posted April 29, 2012 Share Posted April 29, 2012 Go external wastegate, much better and precise control over the boost. Don't think a TD05 will flow 350bhp, will get close to it though if your not that worried about chasing figures. Quote Link to post Share on other sites
starletburkie Posted April 29, 2012 Share Posted April 29, 2012 a td05 at 1.7 bar on 5e should see 350bhp Quote Link to post Share on other sites
Taggy Posted April 29, 2012 Author Share Posted April 29, 2012 i spoke to nick at tuning developments about it i think it will be more like the low 300's on a td05, i am thinking of going down the vf30/vf34 route Quote Link to post Share on other sites
starletburkie Posted April 29, 2012 Share Posted April 29, 2012 td05 at 1.7 bar is going to make around 330bhp on 4e but had to turn the boost down due the the wastegate so im sure it will see 350bhp on a 5e? Quote Link to post Share on other sites
AdamB Posted April 29, 2012 Share Posted April 29, 2012 Will run out of puff quicker on a 5e. 1.7 bar is probably pushing it on the td05's efficiency range. Quote Link to post Share on other sites
Taggy Posted April 29, 2012 Author Share Posted April 29, 2012 yeah i wouldn't want to run 1.7bar on track, i would be looking for about 1.5bar Quote Link to post Share on other sites
Taggy Posted April 29, 2012 Author Share Posted April 29, 2012 How do you mean it will out of puff quicker on a 5e? its got a bigger displacement so it should be able to spool the turbo earlier.Will run out of puff quicker on a 5e. 1.7 bar is probably pushing it on the td05's efficiency range. Quote Link to post Share on other sites
AdamB Posted April 29, 2012 Share Posted April 29, 2012 Yes it will spool it earlier, but top end performance will be restricted due to the engines increased displacement. If that wasn't the case we would have v8's running ct9's TD05 on a 5e will spool very well and at 1.5 bar will still be producing very good figures. Torque is the much more important factor rather then bhp. Quote Link to post Share on other sites
Socks Posted April 29, 2012 Share Posted April 29, 2012 No offense taggyBut the money uve quoted as a budget and the power u want is gonna be hard. U can skimp on a turbo system but the chances are you will encounter. Cracking weldsLaggy shit spoolPoor fitmentBuy cheap but twice mate. Chances r if u can find a racetech disco or Wepr kit 2nd hand u cud sell it later for the same money. A lot of people poo when they see how much a racetech kit costs but chances are Ud get a lot of it back if and when you sell. More of an investment then blowing money away. You went 5e for torque and response. Do t mate it to a turbo kit that will giv u ahit spool and no torque Hope this helps. Quote Link to post Share on other sites
daniel_g Posted April 29, 2012 Share Posted April 29, 2012 A few people have went down the k24 route.Cant imagine that setup is cheap though... Quote Link to post Share on other sites
Taggy Posted April 29, 2012 Author Share Posted April 29, 2012 I'll keep an eye out for a wepr kit then Quote Link to post Share on other sites
starletburkie Posted April 29, 2012 Share Posted April 29, 2012 td05 comes off a 2.0 im sure on a 1.5 it wont run out of puff?? Quote Link to post Share on other sites
Amjad Posted April 29, 2012 Share Posted April 29, 2012 WEPR! Quote Link to post Share on other sites
DevonGT Posted April 29, 2012 Share Posted April 29, 2012 No offense taggyBut the money uve quoted as a budget and the power u want is gonna be hard. U can skimp on a turbo system but the chances are you will encounter. Cracking weldsLaggy shit spoolPoor fitmentBuy cheap but twice mate. Chances r if u can find a racetech disco or Wepr kit 2nd hand u cud sell it later for the same money. A lot of people poo when they see how much a racetech kit costs but chances are Ud get a lot of it back if and when you sell. More of an investment then blowing money away. You went 5e for torque and response. Do t mate it to a turbo kit that will giv u ahit spool and no torque Hope this helps.^^^^ x2 Quote Link to post Share on other sites
Taggy Posted April 29, 2012 Author Share Posted April 29, 2012 i am looking at the zisco kits for about £480, anyone used them? Quote Link to post Share on other sites
Taggy Posted April 29, 2012 Author Share Posted April 29, 2012 where can i buy wepr systems from? Quote Link to post Share on other sites
Asad Posted April 29, 2012 Share Posted April 29, 2012 iddy can get you a wepr setup ^ Quote Link to post Share on other sites
Taggy Posted April 29, 2012 Author Share Posted April 29, 2012 hmm he seems to be getting all my wages lately lol Quote Link to post Share on other sites
Azz Posted April 29, 2012 Share Posted April 29, 2012 hmm he seems to be getting all my wages lately lolIve just got a wepr evolution mani e/g off Iddy so he can do them no problem buddy but like Socks said your budget mite just buy the mani Quote Link to post Share on other sites
mrkd5916 Posted April 29, 2012 Share Posted April 29, 2012 i used both wepr and zisco and are both worth the money, i cant commet on racetech as i havent had the chance to see or use one of there kits but from what every one has sed they are very good, Quote Link to post Share on other sites
Taggy Posted April 29, 2012 Author Share Posted April 29, 2012 (edited) i havent got a clue on the prices on the systems, so i just stuck in what i thought it might be lol Ive just got a wepr evolution mani e/g off Iddy so he can do them no problem buddy but like Socks said your budget mite just buy the mani Edited April 29, 2012 by Taggy Quote Link to post Share on other sites
Ricky@Race-Tech Posted April 29, 2012 Share Posted April 29, 2012 Our "bigger turbo kits" will spool as good/better than a TD04 and make more power than a TD05. I'd strongly recommend to save and buy something decent.Remember things like the manifold and downpipe design will play a part in spool and max power. I don't think any manifold on the market other than ours even has a "true" merge collector. Quote Link to post Share on other sites
shorty Posted May 7, 2012 Share Posted May 7, 2012 (edited) WEPR all tge way tbh. been in the starlet scene for donkeys, proven and tested and no where near as expensive as other kits. come with lifetime garentee too. what more could you want dude. also td05's have sevral models in the range. is realy starting to bug me with how many people on this forum say they flow 300 at a push. have you seen the bigger td05's they are fuckin huge!! Just get a gt series mani kit from wepr then you have loads of scope for turbos dude. as for price/quality wepr are very much affordable and quality is second to NONE!!!!Cant be arsed to correct all the mistakes. im on the phone lol fat thumbs small keys lol Edited May 7, 2012 by shorty Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.