Ryan-11 Posted August 7, 2012 Share Posted August 7, 2012 Off topic but any news on your kits Keri? i pm'd u but never got a reply Quote Link to post Share on other sites
Keri-WMS Posted August 7, 2012 Share Posted August 7, 2012 I'm up to my neck in a VAT return (due midnight tonight, argh...) but will spend the next day or two answering everyone to get back up to date. The latest for those that might be reading this is that we should have some finished kits ready next week or the week after! Quote Link to post Share on other sites
Mikep82 Posted August 23, 2012 Share Posted August 23, 2012 Interesting topic as i see now that a ksport brake doesnt work with a dished wheel with the balancing lead in the middle of the wheel. and to use those cheap spacer rings to offset the caliper. Are those hi grade heat resistant as they look uber cheap i tbh do not trust that part. and brakes are for safety!Wms kit lines up better without any hassle and thats worth a fortune for me.Choice Wms.Is that Wilwood alu bell rotor also available on the market?Ya also can check out the Endless brake kit ;) Quote Link to post Share on other sites
glanzagee Posted August 23, 2012 Share Posted August 23, 2012 Well mine are fitted without the shims and the gap is the same on both sides of the disc and the pad covers the disc perfect Quote Link to post Share on other sites
klyfax Posted August 24, 2012 Share Posted August 24, 2012 Had a D2 kit lying around, sold them, Ordered myself a WMS kit instead, was going for TMD wilwood kit, but TMD is closed. (R.I.P)The D2 kit was really heavy. An other starlet freak over here, bought a Brembo kit for a Honda and put it on he's starlet. Much lighter than the D2 kit (same size). On pics, WMS seems lighter than K-Sport and D2 (Same parts, different names), but I know when i get the kit. Quote Link to post Share on other sites
Keri-WMS Posted August 24, 2012 Share Posted August 24, 2012 ....which shouldn't be too long as I FINALLY had some caliper bodies arrive this morning! (I've got a heap of people to PM now) Quote Link to post Share on other sites
WallaceGlanza Posted August 24, 2012 Share Posted August 24, 2012 Well mine are fitted without the shims and the gap is the same on both sides of the disc and the pad covers the disc perfectWow not much clearance there! I thought the wilwood kit i've just made up didn't have much but it's loads compared to that. Quote Link to post Share on other sites
Keri-WMS Posted August 24, 2012 Share Posted August 24, 2012 Looks tighter than our kits too! Hard to be sure exactly. Quote Link to post Share on other sites
glanzagee Posted August 24, 2012 Share Posted August 24, 2012 i would say theres 2mm on each side Quote Link to post Share on other sites
perreau Posted November 28, 2012 Share Posted November 28, 2012 Thanks for the info guys. Very informative. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.