Weyro Posted October 18, 2012 Share Posted October 18, 2012 Only ask because when i bought the car, the guy said the FCD and EVC4 were installed and setup by a garage.The EVC4 was set up so shit and crazy it was unreal. Boost alarm was set at 0.2bar even though low boost was 0.7, was nuts.So it got me thinking, maybe they didnt know what there were doing with the FCD: Quote Link to post Share on other sites
MARC MOSS Posted October 18, 2012 Share Posted October 18, 2012 I that at zero ? Quote Link to post Share on other sites
Weyro Posted October 18, 2012 Author Share Posted October 18, 2012 The arrow at the bottom is pointing at 12 but the thing in the middle is at 7 I think. Quote Link to post Share on other sites
honda killer Posted October 18, 2012 Share Posted October 18, 2012 theres no 0 on a hks fcd!!12 is off..looks like its set to 7..get it checked if your using a fpr on a rr.. Quote Link to post Share on other sites
Weyro Posted October 18, 2012 Author Share Posted October 18, 2012 I've got my own wideband, the afr's are good and the car runs well. Was just wanting to check that it was set correctly. Quote Link to post Share on other sites
honda killer Posted October 18, 2012 Share Posted October 18, 2012 tink mine is set to 8 each car would b a little different depending on setup Quote Link to post Share on other sites
Weyro Posted October 18, 2012 Author Share Posted October 18, 2012 Mine was quite prone to boost creep when I got it, so that's prob why its slightly lower, I've got and old school safc coming, so hoping I can get rid of the fcd and run 1bar on the td04 with it. Quote Link to post Share on other sites
Weyro Posted October 19, 2012 Author Share Posted October 19, 2012 just noticed something weird, mine only has 1 wire? Quote Link to post Share on other sites
MARC MOSS Posted October 19, 2012 Share Posted October 19, 2012 shouldnt it have three? Quote Link to post Share on other sites
Weyro Posted October 19, 2012 Author Share Posted October 19, 2012 think it should have 4, positive, negative, and 2 for the map sensor wire Quote Link to post Share on other sites
Beastmode panda Posted October 19, 2012 Share Posted October 19, 2012 supposed to be 4 wires in total mate.red, black, yellow, white.red and black obv for power and earth. and the yellow and white actually control the unit i.e tell it what to do and what not.so effectivly your unit isn't even on/working, as it has no power/earth to it.and 7/8 is about the right setting. Quote Link to post Share on other sites
akyakapotter Posted October 19, 2012 Share Posted October 19, 2012 Something wrong there shouldn't there be 4 wires 12v ground and one for each side of the map sensor wire something proper wrong with yours bud Quote Link to post Share on other sites
Weyro Posted October 19, 2012 Author Share Posted October 19, 2012 yea its a bit mental, car runs well, and doesnt hit boost cut or anything Quote Link to post Share on other sites
TurboTobz Posted October 20, 2012 Share Posted October 20, 2012 If this is on the back of the ECU ten the wires are probably under the plastic slats, just hidden away. Then* Quote Link to post Share on other sites
Weyro Posted October 20, 2012 Author Share Posted October 20, 2012 Yea its the back of the ecu, I think u might be right, i pulled the plastic forward and think i could see some other wires Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.