Mr. Chem Posted June 26, 2013 Share Posted June 26, 2013 Hey chaps, I'm rigging up a shift light set up in my 98 Glanza, and was hoping there is someone out there who can give some advice. Does anyone know which wire at the clocks is the rev signal wire? I'm aware of the IGN+ signal at the diagnostics plug, but was hoping there would be one a bit closer to home. Cheers Quote Link to post Share on other sites
TrisK Posted June 26, 2013 Share Posted June 26, 2013 Mine connects to one of the wires on the ignitor/coil Quote Link to post Share on other sites
turbo Grant Posted June 26, 2013 Share Posted June 26, 2013 Usually on the negative side of coil for rpm pick up Quote Link to post Share on other sites
Weyro Posted June 26, 2013 Share Posted June 26, 2013 I tried taking it from the ECU for my fuel controller, but it was giving a mental signalEnded up running a wire from the diagnostic port Quote Link to post Share on other sites
akyakapotter Posted September 25, 2013 Share Posted September 25, 2013 Any one have a picture of where this wire is I need to tap into rpm or speed signal for my boost controller I'll do it at the diagnostics plug if I can locate the wire cheers nick Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.