hutchy1990 Posted July 13, 2013 Share Posted July 13, 2013 Hello I have just put a boost gauge in my Glanza today when I start the car up and not moving it goes to -1 is that right? but from the picture you can see -2 -4 -6 -8 then -1 so am thinking that's -10 if am correct if not correct me please When driving its hitting 0.5 is this safe or not Thanks Quote Link to post Share on other sites
morgey Posted July 13, 2013 Share Posted July 13, 2013 Its Minus0.20.40.60.810.5 bar is about 7.35 psi so is fine Quote Link to post Share on other sites
hutchy1990 Posted July 13, 2013 Author Share Posted July 13, 2013 Its Minus0.20.40.60.810.5 bar is about 7.35 psi so is fineCheers mate do you know what the adjustable actuator mm should be? Quote Link to post Share on other sites
morgey Posted July 13, 2013 Share Posted July 13, 2013 I dont mate, you tried searching the forum for it? Im sure its been covered a few times Quote Link to post Share on other sites
hutchy1990 Posted July 13, 2013 Author Share Posted July 13, 2013 I will have a look about cheers for your help mate Quote Link to post Share on other sites
akyakapotter Posted July 14, 2013 Share Posted July 14, 2013 (edited) Mine goes to about -0.6 you may have a vac leak mate if its going to -10 Edited July 14, 2013 by akyakapotter Quote Link to post Share on other sites
mikey4410 Posted July 14, 2013 Share Posted July 14, 2013 mine runs at -20 psi when idle Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.