Jay2ohh Posted July 26, 2013 Share Posted July 26, 2013 glanza mis firing at low revs, what could it be? is it an easy fix? sorry if its in the wrong place cheers Quote Link to post Share on other sites
Beastmode panda Posted July 26, 2013 Share Posted July 26, 2013 Plugs, ht leads, dizzy cap, rotor arm - are the main ones. Quote Link to post Share on other sites
daniel_g Posted July 26, 2013 Share Posted July 26, 2013 Unless its got a Bee*R, bap bap bap bap braap pop bang bap bap. Quote Link to post Share on other sites
Jay2ohh Posted July 26, 2013 Author Share Posted July 26, 2013 is it bad for the engine? or will it cut out or anything, whats the worst that it could be and price? Quote Link to post Share on other sites
daniel_g Posted July 26, 2013 Share Posted July 26, 2013 On a serious note, its probably nothing major. For peace of mind i'd replace the lot, parts Rbz listed, just so you know you have a healthy ignition system, and a good base for modding. Tuning Developments on here do a ignition upgrade package which consists of that lot, under 180 quid last time i checked. You'll also need your ignition timing set up afterwards. Quote Link to post Share on other sites
TurboTobz Posted July 26, 2013 Share Posted July 26, 2013 I had the same was dizzy Quote Link to post Share on other sites
hutchy1990 Posted August 1, 2013 Share Posted August 1, 2013 Could be your map sensor or inline filter as that's what caused mine.Everyone said it was my plugs, ht leads, dizzy cap, rotor arm etc but it wasn't Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.