Flynn Posted May 7, 2015 Share Posted May 7, 2015 After shelling out a good bit on a genuine spoiler and then a good bit more on paint I'm wanting to do a decent job of fitting it........any tips would be amazing? How have other people gone about it? It's on an n/a boot lid so I'm guessing I'm lacking a few holes I might need? Quote Link to post Share on other sites
karl. Posted May 7, 2015 Share Posted May 7, 2015 You should of fitted it before you sprayed it so as you could of sanded it down to fit. Quote Link to post Share on other sites
akyakapotter Posted May 7, 2015 Share Posted May 7, 2015 Your lacking 2 holes and 2 locating lugs I take it the spoiler already has the holes cut out and the riv nut in the top of the spoiler? Quote Link to post Share on other sites
Flynn Posted May 7, 2015 Author Share Posted May 7, 2015 Being a genuine one the fit is pretty seamless already? Erm it's in at the painters but from memory it's got 2 holes either side and then a couple of smaller holes that almost look threaded up top? Quote Link to post Share on other sites
akyakapotter Posted May 7, 2015 Share Posted May 7, 2015 Ill have a look through my photo bucket and upload mine I fitted it like a genuine no sealant at all on it. Quote Link to post Share on other sites
Flynn Posted May 7, 2015 Author Share Posted May 7, 2015 That would be wicked mate cheers Quote Link to post Share on other sites
akyakapotter Posted May 7, 2015 Share Posted May 7, 2015 I dont have any :/ sorry mate thought I did. Quote Link to post Share on other sites
Flynn Posted May 7, 2015 Author Share Posted May 7, 2015 Ah not to worry bud thanks for looking Anyone else? Quote Link to post Share on other sites
TrisK Posted May 7, 2015 Share Posted May 7, 2015 Ill have a look through my photo bucket and upload mine I fitted it like a genuine no sealant at all on it. And who gave you that wonderful idea ;) Quote Link to post Share on other sites
akyakapotter Posted May 7, 2015 Share Posted May 7, 2015 And who gave you that wonderful idea ;)You did honey Quote Link to post Share on other sites
_shaun_ Posted May 7, 2015 Share Posted May 7, 2015 the glanza boot lid has 2 kinda rivet style studs and a hole for a bolt on each side for the spoiler and the livesports one has the matching bits so it slides onto the riveted studs and then the bolt locks it in place. if you want it oem fitment best bet is buy a glanza boot lid if not its probaly going to be a sealant job Quote Link to post Share on other sites
Flynn Posted May 11, 2015 Author Share Posted May 11, 2015 Ok, thanks for the advice what are people using to bond spoilers on......tiger seal or alike? Quote Link to post Share on other sites
akyakapotter Posted May 11, 2015 Share Posted May 11, 2015 My side skirts are bonded on with sikaflex get it in screwfix was about £6 - £8 I think it's in and orange tube Quote Link to post Share on other sites
Flynn Posted May 11, 2015 Author Share Posted May 11, 2015 ^thanks dude I'll have a look Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.