5ePA Posted June 19, 2015 Share Posted June 19, 2015 Fitted a hks fcd to my glanza today and when I started it and drove it it still fuel cutted and back fired and then cut out and didn't start since, I even put everything bak to standard and still no good it was only swinging. Another problem arose then the swinging stopped and it's only clicks once and doesn't crank I'm after testing everything i think and im wondering what the hell is goin on can anyone tell me? I'm after changing the starter and still no good. The engine is turning by hand and timing is correct I'm kinda lost now so looking for advise 👍 thanks in advance Quote Link to post Share on other sites
Ryan_EP82 GT Posted June 21, 2015 Share Posted June 21, 2015 Lose the hks and buy a jam/greddy bcc if your using a fcd at all mate hks ones arent worth a fuck Quote Link to post Share on other sites
TrisK Posted June 21, 2015 Share Posted June 21, 2015 Earth by the sounds of it? Quote Link to post Share on other sites
GlanzaJim Posted June 21, 2015 Share Posted June 21, 2015 Them FCD gotta be earthed im sure? Not got a decent feed? Quote Link to post Share on other sites
5ePA Posted June 21, 2015 Author Share Posted June 21, 2015 Checked earth's and fuses and everything seems to be ok in that line. It's still only clicking once it's like there isn't enough power goin to the starter to crank the engine Quote Link to post Share on other sites
akyakapotter Posted June 21, 2015 Share Posted June 21, 2015 Check the earth on the starter they corrode and causes issues. Quote Link to post Share on other sites
5ePA Posted June 21, 2015 Author Share Posted June 21, 2015 Got it cranking cheers lads 👍 Still won't start tho I reckon it's down to the map sensor? Quote Link to post Share on other sites
GlanzaJim Posted June 21, 2015 Share Posted June 21, 2015 Map sensor wont stop it from starting Quote Link to post Share on other sites
5ePA Posted June 22, 2015 Author Share Posted June 22, 2015 I flash coded it this evening and 4 faults showed.. these wereCode 12 - RPM signalCode 31 - MAPCode 34 - Turbo pressure signalCode 41 - TPS Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.