Glanza wont crank

[5ePA]

Fitted a hks fcd to my glanza today and when I started it and drove it it still fuel cutted and back fired and then cut out and didn't start since, I even put everything bak to standard and still no good it was only swinging.

Another problem arose then the swinging stopped and it's only clicks once and doesn't crank I'm after testing everything i think and im wondering what the hell is goin on can anyone tell me?

I'm after changing the starter and still no good.

The engine is turning by hand and timing is correct

I'm kinda lost now so looking for advise 👍

thanks in advance

[Ryan_EP82 GT]

Lose the hks and buy a jam/greddy bcc if your using a fcd at all mate hks ones arent worth a fuck

[TrisK]

Earth by the sounds of it?

[GlanzaJim]

Them FCD gotta be earthed im sure? Not got a decent feed?

[5ePA]

Checked earth's and fuses and everything seems to be ok in that line. It's still only clicking once it's like there isn't enough power goin to the starter to crank the engine

[akyakapotter]

Check the earth on the starter they corrode and causes issues.

[5ePA]

Got it cranking cheers lads 👍

Still won't start tho I reckon it's down to the map sensor?

[GlanzaJim]

Map sensor wont stop it from starting

[5ePA]

I flash coded it this evening and 4 faults showed.. these were

Code 12 - RPM signal

Code 31 - MAP

Code 34 - Turbo pressure signal

Code 41 - TPS