Jump to content

Recommended Posts

Posted

now my readings on the aem Wideband are between 14.2-14.8 (likes to go up and down alittle) where as before I was getting 16.5-17

The stock ecu is trying to run stoich on idle/low load (warm engine), so your AEM should be showing between 14.2-14.8. Value will change all the time as the ECU is constantly monitoring the lambda voltage and adjusting fuel to maintain a stoich A/F ratio.

lowered the fpr to around 2.6bar now have readings at 5k revs and over of 11.4-11.7 that's on full boost, from reasearch and everyone's help that to me seems about spot on.

Sounds right for WOT.

Posted

Thankyou Jay mate yeah had to keep adjusting it bit by bit, as most people say it's not on idle that's counts it's on wot

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...