Stock car with TD04

[morgan]

ok so I have seen a few threads on this but no one really saying what I need to know.

My stock CT9 needs replacing, I was just going to replace with a reconditioned stock CT9 but also wanting to go with a TD04 in the future.

So to save me spending money on a CT9 that will only be in there for 6 months or so could I put on a TD04 but keep the boost at stock pressures (0.6 bar I think?)

So my question is can I run a TD04 on stock EVERYTHING so ecu, fuel pump, the lot as long as I'm not adding any more boost. I'm not on the hunt for power just yet, just a working car

Thanks for any input

[5e colin]

7 psi personal experiance tdo4 was in my gtt more and it ran lean worked good

[Ollieh17]

Ran 0.8 bar on a td04 on glanza, standard ecu etc same as you. Fuelled fine, i did have a wideband though

Edited August 8, 2015 by Ollieh17

[morgan]

Was thinking of getting a wide band to be on the safe side

[5T4R7ET N/A]

Boost it 0.5 on a good actuator like a HKS.

Mine fuelled fine at 0.5

[morgan]

Going with an Tia 38mm external wastegate so if I put in the spring for 0.5 bar I will be fine until I get a new ECU, FPR and file pump ? In which case I can add a boost controller to set it to what I need

[maddox710]

I ran mine @1bar 232bhp 233lb-ft

Hks pfcon+gcc ecu