turbominicooper Posted August 21, 2015 Share Posted August 21, 2015 ive read that the wideband bung should be welded 1 meter from the turbo, does anyone have advise on where the best place is for space and not fouling the gear selector... pic maybe? cheers Quote Link to post Share on other sites
mattyD Posted August 21, 2015 Share Posted August 21, 2015 Should be about 30 inches or so from the turbo mounted at about a 45 degree angle in the exhaust... I think Quote Link to post Share on other sites
Arnold Posted August 21, 2015 Share Posted August 21, 2015 (edited) The tip needs to be lower than the wiring. See attached image Edited August 21, 2015 by Arnold Quote Link to post Share on other sites
5e colin Posted August 21, 2015 Share Posted August 21, 2015 whats the tech behind it is it liquid filled or something ????? Quote Link to post Share on other sites
karl. Posted August 21, 2015 Share Posted August 21, 2015 I think its to do with condensation Colin, from memory if its any lower the sensor will need replaced more frequently. Quote Link to post Share on other sites
turbominicooper Posted August 21, 2015 Author Share Posted August 21, 2015 Should be about 30 inches or so from the turbo The tip needs to be lower than the wiring. See attached image cheers chaps Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.