steve1093 Posted April 3, 2016 Author Share Posted April 3, 2016 Looks cool man!Cheers Matt! Quote Link to post Share on other sites
steve1093 Posted April 23, 2016 Author Share Posted April 23, 2016 Popped down to JDModified this morning with SXOC for a rolling road day.Nice to see most of us were disappointed with the results too! Haha.So I made 254.8, which is pretty disappointing... The AFR was all over the place and it's running very lean. Runs very rich on idle and very lean on boost, the exact opposite of what it should be!Time to pop down to Horsham Developments! Was a good morning though, now roll on Japfest, if it doesn't blow up on the way! Haha. B18 yo! Haha. Quote Link to post Share on other sites
NewbieLewby Posted April 27, 2016 Share Posted April 27, 2016 Lol was that a civic once. You were at that west meon hut meet weren't you. I was gunna go but many uni work to do :'( Quote Link to post Share on other sites
steve1093 Posted April 28, 2016 Author Share Posted April 28, 2016 Lol was that a civic once. You were at that west meon hut meet weren't you. I was gunna go but many uni work to do :'(The pistonheads meet on Tuesday evening? Yeah I was there, rained for most of it haha Quote Link to post Share on other sites
steve1093 Posted May 23, 2016 Author Share Posted May 23, 2016 Nothing much has changed lately, all the carpet has been removed and I've dropped the front another 15/20mm. Still needs another 20mm or so to go. Currently saving for the complete GReddy TD06 kit too, so more power to come towards the end of the year! Quote Link to post Share on other sites
Dan507 Posted May 24, 2016 Share Posted May 24, 2016 Looks good man, TD06 is the way forward! mine about 430bhp @1.35bar it's insane Quote Link to post Share on other sites
steve1093 Posted May 24, 2016 Author Share Posted May 24, 2016 Looks good man, TD06 is the way forward! mine about 430bhp @1.35bar it's insaneThanks man! I can't even imagine what it would be like haha! You forged internals? Quote Link to post Share on other sites
Dan507 Posted May 24, 2016 Share Posted May 24, 2016 Nope, Mine has a Red top, straight cam SR, but has a S15 Crank, Rods (thicker than older types) and pistons and also S15 VVT Cams. APR head studs, Thicker head gasket and ACL bearings. Engine was built and mapped by Nispro Quote Link to post Share on other sites
steve1093 Posted May 28, 2016 Author Share Posted May 28, 2016 Ahh nice one! Mines a stock straight cam SR, not sure how much power they can take reliably to be honest... I'm guessing 350-400 would be okay for a while, depending on how it's driven haha Quote Link to post Share on other sites
steve1093 Posted May 29, 2016 Author Share Posted May 29, 2016 (edited) So I dropped the front another 15mm, and it's a massive improvement! Another 5 or so to go when I can be bothered to do it again.. Edited May 29, 2016 by steve1093 Quote Link to post Share on other sites
steve1093 Posted June 22, 2016 Author Share Posted June 22, 2016 (edited) Took a little trip down to Brighton for a little meet. I am slowly beginning to really miss my old Glanza!Although for the last week it has currently been sat on the road feeling sorry for itself...Having some issues with running 10j wheels on the front as low as I want. And I fancy a little change, so I'm currently waiting on 2 of these from Work Wheels Japan. Should be here in about 6 weeksPlan to run a lot less camber, as this is still a daily and I can't be asred to fork out for tyres all the bloody time! Edited June 22, 2016 by steve1093 Quote Link to post Share on other sites
NewbieLewby Posted June 23, 2016 Share Posted June 23, 2016 Oooh Like the emotions Quote Link to post Share on other sites
steve1093 Posted July 8, 2016 Author Share Posted July 8, 2016 Learnt my lesson to keep an eye on the tyres a little more... Quote Link to post Share on other sites
daniel_g Posted July 8, 2016 Share Posted July 8, 2016 Worth it for the JDM scene points y0 Quote Link to post Share on other sites
NewbieLewby Posted July 9, 2016 Share Posted July 9, 2016 Haha Rotate once a week 😂 Quote Link to post Share on other sites
steve1093 Posted July 23, 2016 Author Share Posted July 23, 2016 Nothing much new, had to raise the ride height at the front up again also decided to get rid of the rest of the interior... #BecauseDriftCar haha Quote Link to post Share on other sites
patman Posted July 23, 2016 Share Posted July 23, 2016 Hope all is well Steve and the cars treating you good mate 👍🏻 Quote Link to post Share on other sites
steve1093 Posted July 26, 2016 Author Share Posted July 26, 2016 Hope all is well Steve and the cars treating you good mate Cheers Pat! It's still working, so I guess you can call that treating me well haha! Hope all is well with yours? Finally got round to cleaning this for the first time in many months! For shit paint, it doesn't come up too badly... Good day with Lewis' new MX5 too Quote Link to post Share on other sites
patman Posted July 26, 2016 Share Posted July 26, 2016 All good this side cheers mate glad you and your car is doing well mate Quote Link to post Share on other sites
NewbieLewby Posted August 2, 2016 Share Posted August 2, 2016 sssshhhh i havnt told anyone on here i brought an MX5 yet! Quote Link to post Share on other sites
steve1093 Posted August 4, 2016 Author Share Posted August 4, 2016 So the new front setup arrived today...... So pleased with my choice!Also have JDMDistro searching for a pair of Work VS-KF too Quote Link to post Share on other sites
NewbieLewby Posted August 5, 2016 Share Posted August 5, 2016 Quote Link to post Share on other sites
turbomad Posted August 5, 2016 Share Posted August 5, 2016 Car looks amazing I'm looking to import one when I finish my rx7 next summer Sent from my SM-G930F using Tapatalk Quote Link to post Share on other sites
steve1093 Posted August 6, 2016 Author Share Posted August 6, 2016 Car looks amazing I'm looking to import one when I finish my rx7 next summerSent from my SM-G930F using TapatalkThanks dude! RX7 sounds much better though haha! Quote Link to post Share on other sites
steve1093 Posted August 6, 2016 Author Share Posted August 6, 2016 So had a quick test fitted of the new T7R's. Hard to tell until it's on the ground, but fitment should be a lot better! Also seeing as the rest of the interior was removed, thought it was about time to get the other Bride seat in there.. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.