ChrisLeeBoost Posted January 31, 2016 Share Posted January 31, 2016 My half rad is losing a lot of coolant and the car keeps overheating, there's no milky stuff around cams when I open up oil filler cap, and no foaming out of the rad and no visible signs of any leaks anywhere, any ideas lads it's been fairly cold around lately so there is a fair bit of condensation coming out of the exhaust at times, the last thing I want to hear is head gasket gone Quote Link to post Share on other sites
patman Posted January 31, 2016 Share Posted January 31, 2016 Have you checked everything mate with the engine running? Even at the back where water pipes are, could be water pump seal, even heater matrix Quote Link to post Share on other sites
Gainzy Posted January 31, 2016 Share Posted January 31, 2016 Check the plastic screwy release valve where you drain it at the bottom..they usually have a shitty rubber seal that can split. Quote Link to post Share on other sites
ChrisLeeBoost Posted January 31, 2016 Author Share Posted January 31, 2016 Haven't checked the water pipe behind engine yet mate will have a look tomorrow! The bleeder thing on bottom of rad seems to be fine and can't see any signs of leaking from water pump but as you said I should check with engine running, heater matrix is that a common problem? Is there any symptoms to look for when it's the heater matrix acting up? Thanks for the replies lads I'm on the verge of pulling my hair out at this stage Quote Link to post Share on other sites
funny onion Posted February 1, 2016 Share Posted February 1, 2016 are you using the rad cap that came with the rad? try swapping it for a better one if so. I had a similar problem and mine turned out the be the shit rad cap, replaced it with a blitz one and it seems much better Quote Link to post Share on other sites
ChrisLeeBoost Posted February 1, 2016 Author Share Posted February 1, 2016 Yeah using a trd one that came with the rad Yeah using a trd one that came with the rad Quote Link to post Share on other sites
ChrisLeeBoost Posted February 1, 2016 Author Share Posted February 1, 2016 Also I noticed the overflow keeps filling up Quote Link to post Share on other sites
fiddlersport Posted February 1, 2016 Share Posted February 1, 2016 Most likely head gasket....get a sniff test before removal Quote Link to post Share on other sites
ChrisLeeBoost Posted February 1, 2016 Author Share Posted February 1, 2016 Yeah will do, if it's head gasket the car is getting broke for parts Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.