mech5107

I think this is turbo brakes. If they measure 254-255mm and are around 18-17mm thick they are turbo brakes.

I would say no... connector is different and the mounting points don't seem to be close...

Why you took them off? Anyhow, ct9 can do 150 whp, more is difficult. You should just need FMIC, some decent exhaust turbo back and just about all the boost without hitting boost cut. I was running 0.8 with the stock ecu. Do you plan to change the exhaust manifold. Since you have it out, it's a good oportunity to get one done. I think the stock manifold is too restrictive. I would be interested in a stock location manifold also.

Hi... Also Greek, also ep71, also 2etelu. I live in UK though and my ep71 is in Greece. Take the wheel off and take a good photo of the caliper and the numbers cast on it. Could be ep82/91, ep71 turbo, gt/glanza

I also have 2etelu in my ep70. Running toyota diesel C turbo, 60mm decat and full exhaust, FMIC with 50mm pipework, rx8 red injectors and standalone ecu. Those engines run fine with a T25 at 0.7-0.8 bar for about 180hp, but don't forget that most of those engines are now 30years old.

Black racing 14x6 5.1kg