Jump to content

nikhilkamdar12

Member
 View Profile  See their activity

  • Content Count

    807

  • Joined

  • Last visited

 Content Type 

Everything posted by nikhilkamdar12

  1. nikhilkamdar12
    bump
  2. nikhilkamdar12
    Fully bolted up the turbo... Gave it polish up More to come soon
  3. nikhilkamdar12
    Just checked it out, looks like a wicked build mate. Similar parts also, should both make a nice figure
  4. nikhilkamdar12
    Nice build mate Looks like this thing will make a nice bit of power
  5. nikhilkamdar12
    Cheers mate, What kind of power you running?
  6. nikhilkamdar12
    Fitted the PFC to the car and all works fine Think there is a problem with the electrics going to the starter as even on stock management the starter motor is just clicking so need to check all the wiring?
  7. nikhilkamdar12
    Did you manage to fix this as i'm having a similar problem??
  8. nikhilkamdar12
    Driver side wing sold
  9. nikhilkamdar12
    Thanks! Its come a long way and almost done
  10. nikhilkamdar12
    Yepp still have it PM sent Nikhil
  11. nikhilkamdar12
    Can you bolt the stock throttle body to this? or have to go aftermarket? Nikhil
  12. nikhilkamdar12
    bump
  13. nikhilkamdar12
    Cheers bro, appreciate it!
  14. nikhilkamdar12
    Got my engine management today Decided to go for the Apexi Power FC as it is the easiest standalone setup for our Glanza's and have been proven Got a brand new Apexi stand for my AVCR as well to finish it off... and the Power FC... Mapping will be coming hopefully in the next couple months More coming soon..
  15. nikhilkamdar12
    Have the SPEC 6 PUK clutch and has lovely driveability and can handle lots of power
  16. nikhilkamdar12
    up up up
  17. nikhilkamdar12
    Cheers mate The GT3s are 15x7 and believe the offset was ET40 on that set. Defo run 15s imo as best suited to the Glanza The GT3 are wicked wheels but thought id try something different now
  18. nikhilkamdar12
    Got myself a Apexi AVC-R boost controller and engine management coming in January, so got all my supporting mods done
  19. nikhilkamdar12
    bump
  20. nikhilkamdar12
    bump
  21. nikhilkamdar12
    You bled it from the furthest away from the master cylinder then 3rd ect...?
  22. nikhilkamdar12
    bump
  23. nikhilkamdar12
    bump
  24. nikhilkamdar12
    Yes same shell apart from a few differences from the 1996,97 to facelift 98,99 but interior is the same for your rear seats
  25. nikhilkamdar12
    1) Start by removing the battery 2) Id say leave it for a bit lol 3) Then go to the steering wheel and on the left side underneath a plastic cover is a torx bolt in there you need to undo and the other side to 4) The front airbag cover should come off 5) You will see the airbag in there and i'm sure its held in with a few bolts, undo them and undo the yellow wire attached to it along with the yellow airbag ring that goes there as well 6) You will see a big nut holding the wheel on, undo this too but don't take it off fully. Before you do take it off fully, pull the steering wheel to break
×
×
  • Create New...