-
Content Count
683 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by turbominicooper
-
-
so i bought this little device from this site - jfbreton.blogspot.com/
https://www.youtube.com/watch?v=YfbG_h_PlrE
i got the harness (£30) and plugged (£35) version down:
install was easy with the plug:
but a bit more trickier with the harness.
due to me having a mk1 GT i did not have an ecu with TE2 pin nor did the wire go to the diagnostic plug so there was some messing about getting it to work for me but for anyone with a more recent ecu (non-green labelled) should be ok for plug-n-play.
once setup it was just a case of downloading the TOYODB1 app from the PlayStore (android only) and setting up:
turn the key, and...
data:
easy data
im not selling these so please dont send me enquiries.
Thanks
Ryan
-
Wepr sells new kits
Will take a look. Cheers dude
-
Looking for a strong, braced VF35 kit for my 5e, preferably branded like wepr/zisco (someone reputable).
as mentioned the manifold and downpipe must be strong, no cracks and have a brace.
vf35 should be sound, no smokes, rattles, cracks etc.
needing oil lines with the turbo although water lines arent necessary.
if its externally wastegated i will need this too, only wanting genuine tial etc. no cheap poop!
ideally kit to be already built with decent gaskets but not necessary.
must be able to post as cant collect, any junk will be sent back.
cheers
ryan
-
Blueprint will do fine on standard setup
-
If its standard buy standard discs n pads
-
ill just get new ones, may aswel do the work now while im in the modd rather then down the line
-
Grrrr
-
i think i already know the answer to this.
so heres what i found:
looks like the spring that goes around the oil seals in particularly the crank shaft seal.
since the rebuild ive done less than 50 miles and have oil leaks both side of the crank so my fear is that if i took the gearbox off id see a slightly larger spring off that seal too.
i havent changed my approach to pressing seals in and other engines dont have this problem.
the only difference is that i bought this 'genuine' kit off a different seller then usual (will name later) and i did question the kit quality from the start; kit came down unsealed, the manifold gasket had snapped, there was dust all over it from the exhaust seal, all the valve stems were loose and now i find part of it in the sump??
-
do the topics started purge after 1 year?
-
sorted now chaps, it was the lip not sitting in the hole properly. cheers
-
sorted now
-
speedo cable for mk1 GT please, posted.
cheers
Ryan
-
It's true mate...
U r a legend!
Thanks pal
-
you could be a legend morgey!
ill take a closer look and feedback later.
cheers for the quick reply
-
bought an ALK off someone on here about a year ago.
reading instructions i saw it said yellow bushes and id been sent dark ones.
quick google search and saw dark ones so cracked on with fitting.
then saw it sitting like this:
obviously not the right ones that came originally with the kit.
so my questions can and where do replacements alk bushes?
dont really want to buy another kit just to get some bushes but also dont want to buy another standard bush seeing as ive gone far enough to have removed and cleaned off the original.
cheers
ryan
-
for gt?
-
Condition and mileage on the vf?
Genuine tial wg?
-
-
alright,
i was installing a set of these camber adjuster bolts by eibach.
got them all on sound but then when torquing up (132nm) the lip in the eibach washer sunk into my strut creating its own groove.
this cant be right, my understanding was the washer sat at a slight angle
anyone else had this?
-
Any difference using the normal millers over the competition running in oil for a standard motor rebuild?
-
£250 for the 4 for a quick sale
photos / condition?
-
If the 5efhe had acis maybe some could be for the solenoid to control actuator to change over between the two sets of runners.
i had read about this being possible but like colin said auto = no acis. might just have to snip it?? not using hi-lo solenoid or s/th (whatever it is) eitherway
-
Found the only link on the Web that describes s/th as a T-vis solenoid
http://club4ag.com/tech-data/tech-specs/4a-gze-usa-aw11-ecu-pin-identifications/
Any ideas where that would have been on a 5efhe auto??
-
Actual pin comparison on both ecu. That vsv1 is getting a reading from whatever the s/th pin is??
Bc is boost control where would that wire go to?
On screen ECU information?? - ZF TOYOBD1 Data Logger
in Electronics
Posted
looking on logs it's bout 1.3 seconds flash rate
ill post logs in next hour