-
Content Count
683 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Posts posted by turbominicooper
-
-
https://www.youtube.com/watch?v=x9R-dtk6pUA
-
Alright all
Basically on idle I've heard this high pitch squeaking noise.
The other day when I slammed the bonnet down i heard it when the engine was off.
I looked again and basically if I just shake or wiggle the engine I can hear this squeaky noise.
Engine mount yeh?
Can get a vid if it helps.
Cheers
Ryan
-
Is that splitter road legal?
-
Square light or quad have different fitment, I have a square light one here
square light is what i need mate
-
Loom (2 plug ecu loom from an auto)
Inlet manifold and TB (including sensors)
top mount intercooler (with Turbo cover)
Distributer (clip type)
i can do the above
-
as above. in need of the GT badge that sits on the grill. ta
-
-
Ok cool I'll try and find that one. Any ideas on ep82 which one?
-
trying to fit an apexi at2 unit to my ep82 (second hand unit).
spliced the white/red wire from ignition to red on unit
spliced the blue/red wire from the ignition to blue on unit
spliced the black/white wire from the ignition to the green on unit
spliced the yellow/blue from handbrake to the grey on unit
earthed the black
when i switch the ignition off the engine cuts out but the electronics stay on for the timed duration and then go off.
pretty sure i got wires right as i cont-tested them before hooking up but havent managed to find an official Apexi AT2 wiring diagram.
any ideas chaps or just faulty TT?
cheers
-
my hunch is this is the stalk not engaging properly but here goes...
my indicators do not flash they just illuminate to the direction I point them (L & R).
I thought at first it was the relay playing up and was going to ask where it was located behind the dash but last night when I had it on I pressed the direction a little harder (either L or R) and then it began to flash but a very slow flash??
so what do you think faulty stalks or faulty relay?
-
someone should jump on those TF's
glws dude
-
so RT it is
cheers for input guys, seems a case of you get what you pay for.
-
whats the verdict?
power
reliability
resale value
-
Good video that mate not sure about the backing music lol
-
-
-
It's a fb group. Join it
-
-
You don't really need to pull it out to do the above but if u r may aswel do rings and bearings.
-
Cool. Cheers guys
-
What's the views on this bad boy, worth the moular?
-
this has kind of created a late spool as the tf035 wheel is 0.5mm smaller on the exducer so doesnt spool up aswel as it could in the tf035 comp house.
yeh ignore this. just me being over excited to get out and drive it hadnt jubilee'd my intercooler hose on to the turbo properly.
now its on proper shes a beast! spools up at 2500rpm, 11.3 afr on boost and to be honest is starting to scare me. got it set at 10psi and its flying out of corners and overtaking / straight line acceleration is insane
need some decent tyres now to keep it a bit steadier on the road.
well happy. think this billet td04/tf035 build is gonna be the icing on the cake
-
as in the title im looking for:
Lightweight 5e Flywheel (not burnt out).
2x decent spec tyres to suit 15x6" rims
will need to be posted too.
cheers
-
sweet thats great news that's going to work well for you on the 5e quick response turbo al about torque will be a tfo35hm/ tdo4l13t hybrid then ( for peeps doing research on pic of turbos above thats not a tdo4l13t )
i ordered that machined 19T core for myself to go with my 19t wheel housing and wheel that i have already will see how that works on the tfo35hm turbine shaft/spindle ( 6cm housing ) will be a whil yet before build tho ha ha
i can get the turbo built this week but machinist is on holiday till next saturday so dont know when will be able to get that done. should be sweet as when done.
race is on then colin, who will build turbo first
Has my engine mount gone?
in Engines
Posted
ok cool, will give it another going over. cheers