JamesP

Thanks for the comments! I'll get some pictures up of what I've done to it so far tomorrow.

Hi all, I keep meaning to start a build thread and kept forgetting but I've finally decided to start one. I bought the car back in october 2013 from torgue gt. I've always wanted one and after seeing it online decided to have a look at it. After test driving it I had to have it. Here's a few pics from when i picked it up. It's running a toyosports td04 turbo kit and mapped on EMB at 215 bhp atm. My plans are just to tidy it up and enjoy it at the moment. I already done a few things to it and got some nice parts turn up so I'll update it when I get chance.

What's a set of 4 rays te37's in bronze worth? 15x6.5 et35 4x100 still with original stickers. Good overall condition but two of the lips were damaged by a pothole which have been repaired by southwest wheel repairs. I can guarantee all are straight and true and would have 4 toyo t1rs with 4-5mm of tread left?

Pm'd you

Pm'd you about the gearbox

Thanks for the link mate. One in Devon would be good though so I can collect it.

Anyone?

I'm looking for a ep91 glanza v dash. Preferably in the Devon area so I can collect it.

Is he on the forum then? I was going to put up a spotted thread but kept forgetting. Haha glad I helped you win the argument. Mine seems to be quiet just driving around town normally but loud on boost! I think I remember seeing a silver one a long time ago, could have been yours?

yeah I've seen it in Crediton a couple of times but only from a distance so cant remember anything obvious thing about it to try and describe it to see if you recognize it.Yeah I remember that but I wasn't sure if it was yours or not sorry if i didn't put my hand up. Where about's you work? I don't drive it a lot, I've got a van for work so I only use it occasionally on the weekends so that's probably why you've not seem me before. I never see any around though, I always assumed they're quite rare but came on here and there seems to be quite a few in this area. Really? I always thought mines

Thanks it needs a bit of work but I'm starting to get it how I want it now. Yeah I live a few miles outside of copplestone heading Barnstaple way. Fair enough I asked because I keep seeing a ep82 and not sure who owns it, didn't know if you knew who's it is?

That would be me mate. I'm on the forum a bit but don't post much, I keep meaning to put a build thread up but never get around to it. You got a black ep82 by any chance?

Bought a set of wheels off him. Condition of them was exactly as described and very well packaged for delivery.

Ak motors in Plymouth are good. Been down there a few times and they've always been welcoming and helpful. They'll be able to sort out what you need and they map emanage if you need it. They've got a 4x4 rolling road and can map most ecu's as well.

I made a integra dc2 rails fit my ep with a bit of work and I think there the same as ek9 ones. The front two feet need a bit of bending and the holes making bigger which is pretty easy. The rear one nearest the door needs to be bent a bit flatter and then cut off and welded as the rails are slightly longer than ep ones. Then I made a bracket from the exhaust tunnel mount on the ep which bolted to the last hole on the dc2 rails. Doesn't take long do if your good with a welder or know someone who is and it's a lot cheaper than sourcing ep rails.

I'd be interested in a purple one with braided fuel line, if it's not too late.

Have you get a separate water temp gauge in your car? Not the one on the speedo cluster but a aftermarket one? It's for a temperature sensor to be fitted for a aftermarket gauge.

You will struggle to find the correct rails. Ive been looking for a set of rails for my recaros for ages with very little luck. There are some bride rails that fit recaros but I only found them on new era parts and it was £170 shipping cost! I've given up and just making my own now so you would be best off getting someone to make you some custom ones if you can't make them yourself.

Pm'd you about these!

Thanks for the replies should have looked a bit harder for it

Anyone who knows Browner on here (Conor Browne) able to PM me a number to get hold of him on? I'm after the tracking number for some parts he sent me but i'm not getting any reply to my messages. Or if someone knows him, just let him know he needs to check his messages and let me know whats going on. Thanks.

Use nitromors to get the old paint off and clean it up. Make sure you really clean it after as you won't want any nitromors left as it will obviously ruin the new paint. Then spray it using this range of VHT paints off eBay http://m.ebay.co.uk/itm/350975304890?nav=SEARCH&sbk=1 Starting with a primer and then colour and a lacquer. I have done a lot of covers like this and they have all come out very well. And that range of VHT paint is very good and give a very good finish considering it's rattle can.

Thank you, glad you were happy with the service.

Sold

I would split if I had a buyer for both of them