riko666

looks like a MKI GT/Glanza lovechild...intriguing

reflective ftg - for teh ghey

*waits for harsh fact of reality to smack him upside the head*

Sam, none of the sellers post internationally...it's why Rick & Harrison, Keith, Mark, Toby etc...all have an agent in Japan to send items to

they lower the steering wheel...so they're not too high up especially when you have aftermarket bucket seats which mount lower than stock...

set of 4: Clicky (I think) a single wheel: Clicky

You're going to replace Wedsports wheels for Rota's?? You sir, are dead to me

wow, e-pinions for the complete loss...too much keyboard ego Fishy And that is just a load of bull, anything you said...I don't pretend to know of the car that apparently ran your 11s time (1/8mi most definitely), but if the most seasoned drag racers in Australia, New Zealand, Malta and America...struggle to hit 11's with their 300whp and above cars...yeah, no way in hell.

Clicky Damnit, they removed the illustration!

he's a "named driver"

noooo, not the Blurple machine? I created the namesake!! Phil it really is terrible, but keep your head up...and again, if I can be of help...I'm finding more and more dents on my car all the time, and it's not me driving into things...true, someone of them are my fault, like when a guy kicked my door cause I may have "pretended" to want to runi him over, and it didn't go down to well with him...but others, yeah. But I carry on undeterred Actually, listen to some Cannibal Corpse and old "Carcass"...they'll give you good ideas of Satanic rituals to perform on those insolent baboons! Mwahahahahahah...ahem, yes

you'd be surprised...they (Cynos') don't seem to be TOO popular there, and few are modified

Ahhh, my mistake, thought you were going insane for a bit

Sam, what's the point of going through the hassles/costs of importing one? Seriously? You'd be paying far over their worth to get them in...

no

oooh, what you touching there

*grabs popcorn, waits for people to flame grille the above abortion*

I had about 2000 1:43 scale models....then my mom gave them away when I was 12 or so....bitch

it's an N1 Exhaust Center Section, as Rick says...I think the Starlet's as standard have a 4-1 system, this would convert it to a 4-2-1 which has the effect of increasing low-mid range torque levels, and I presume get rid of the Catalytic convertor too

phew, that's a tiny bit of a relief, thanks Rickypoos! Now it's just getting them to fit that's the issue...And I can't find the tyres I want in the size I want which is gay...ideally I'd like a Goodyear Eagle F1 GS-D3 in 205/45 R15 but alas, no such thing exists

oh it's not putting me off chap! I'd prefer the wider offset wheels upfront for the extra track to improve turn-in characteristics...thats if it can fit with the AE111 brakes in situ though. The dilemma of arch clearance shouldn't be an issue...I would hope, with my plans, but feel free to share more on the subject! The tyres I want to get unfortunately are a 195/50 R15 size! Thanks by the way hun

meh - Well as is, they stick out by about 5mm...so they'll look a bit silly with the 8mm Spacers on too, as well as with Tyres...Chances are, they may need to go on the back wheels anyway, there's only about 5mm between the caliper and the face of the wheel, so I doubt they'd fit with the AE111 Calipers. Seems to be a thing with me, always like to make things a lot more difficult for myself!

afraid not Going to test fit them now...it doesn't help I'll be fitting 8mm spacers on as well for the AE111 brakes...

undercar "bling" ftw Anyway, after a 2 week absence, I come back to Oxford to find... - 15" x 6.5" SSR Longchamps XR-4S Wheels (the dished wheels are a +7 offset!) - Zep Racing Braided Clutch Hose - 5E-FHE Camshafts - Royal Purple Gear Oil (I actually bought this beforehand ) Just awaiting for a couple of things to arrive - Zep Racing Floorbrace, TRD CV Joints, Tanabe 4 Point Lower Control Arm Brace... - and to buy a couple of things...hush hush for now ;). Hopefully will get my clutch plus all little supporting modifications like the clutch hose, CV Joints etc, swapped out next week

And you're surprised?? You were making the car suck air through a long curly straw